Fiber Cement Board, buy Australian Standard Fiber Cement Interior Flooring/Cement Sheet Flooring/internal residential wet areas on China Suppliers Mobile

Product Details

Specificaiton

FC Tongue & Grooved Lightweight Fiber Cement Flooring sheet

FC Exterior and Interior Flooring sheet is an advanced lightweight fibre cement flooring sheet , an external structural sheet flooring substrate for tile finishes over timber or lightweight steel floor joists, that offers speed of installation and the protection you need against moisture damage to balconies , verandas and decks.

Interior Flooring Sheet

Exterior Flooring Sheet

FC Exterior and Interior Flooring has a flat surface with a tongue and grooved joint to the two long edges of the sheet. These edges are coloured Red ,Blue or Black for easy identification.

FC Exterior and Interior flooring is sealed on all sides with an advanced polymer coating that helps protect the board from moisture-related problems. A topcoat on the surface of the board provides good adhesion. The continuous mesh reinforcement on the underside of FC Exterior Flooring enhances the heavy-duty performance of Fiber Cement flooring, adding extra strength and impact resistance to deliver a durable and suitable external residential flooring substrate.

FC Exterior flooring can be up to 40% faster to install than conventional compressed fibre cement sheet. This is because is about 24% lower in density than compressed fibre cemen，making it lighter, and easier to handle and install, without compromising heavy-duty performance.
It’s tongue and grooved, which delivers engineered joints and eliminates the need for timber trimmers under these joints.
FC Exterior Flooring sheet can be installed with power driven nails for ease of installation.
FC Exterior Flooring conforms to the requirements of AS2908.2: Cellulose-cement products, Part 2: Flat sheets for Type A Category 3.

FC Interior and Exterior Flooring Sheet Standard Size

FC Interior and Exterior Flooring Sheet is 19mm thick and has an approximate mass of 25 kg/m2. Sheets are available in the following sizes：

Length (mm)	Width (mm)	Thickness (mm)	Mass (kg/m2)
2,440	600	19	25
2,700	600	19	25
1,800	900	19	25

ADVANTAGES

Lightweight, heavy-duty, Durable
• Easy to install using screw or gun-nail fixings
• Tough durable substrate for external areas
• Immune to permanent water damage
• Will not rot, warp or burn
• Immune to termite attack
• A suitable substrate for many forms of finishing

Application

Internal and external structural flooring substrate for Wet area, Balconies,decks, Verandas

FC Exterior Flooring provides a light weight but solid substrate for self contained dwellings, is suitable for internal and external residential flooring applications. When combined with a suitable waterproofing system it can then be covered with your selection of tiles, decorative finishes, synthetic turf, outdoor carpets or suitable paint finishes. It is suited for a range of external decking applications, including:
• Upper and lower storey decks and balconies
• Tiled verandahs
• Trafficable roofs
• Swimming pool surrounds (non-saltwater)

For balconies that aren’t over habitable rooms – verandas for example – no additional waterproofing membrane is needed once FC Exterior flooring is installed. For balconies over habitable rooms, a waterproofing system needs to be applied.

FC Exterior Flooring may be installed to timber or steel floor joists at 450mm maximum spacings in accordance with the relevant Australian Standards. As an external substrate for tiled residential balconies and verandahs. It’s an alternative to particle board, plywood or compressed fibre cement.