What is a CPi oil water separator filter?

The CPI(corrugated plate interceptor) oil water separator filter is an oil-water gravity separator, is suitable for oily wastewater treatment. CPi oil water separator filter enables high efficiency gravity separation with corrugated plates, providing excellent treatability with a high flow rate.

The simple structure makes it possible to reduce the construction cost and facilitates maintenance.

Our Corrugated Plate Interceptor CPI is mainly used to remove bulk oil from the water.

The CPI basin can be executed in steel or concrete. The concrete units are specifically suited to integrate with sewer systems below ground level so that a gravity flow can be used. The steel CPI can optionally be supplied with integrated oil sump and/or effluent sumpt or with a gas-tight cover.

The corrugated plates are located at short intervals, providing high oil-water separation efficiency. This makes it possible to stably treat rainwater even when the amount of rainwater treated is two or even four times larger than usual.

Compared to the PPI (Parallel Plate Interceptor), the CPI oil water separator filter requires about 2/3 the installation area, and the CPI oil water separator filter has a relatively low construction cost.

The simple structure facilitates maintenance.

Main Applications of CPI(corrugated plate interceptor) oil water separator filter:

Oil field oily waste water treatment

Refinery effluents and run-off

Petrochemical effluents and run-off

Airport or other large site rain run-off