3years warranty 4ft 1200mm 120cm 1.2m led pink meat tube lighting

Specification:

LED fluorescent tube for lighting indoor. LED tube they replace the current fluorescent tubes and save 50% power and lowering the price of maintenance because they do not need ballast or starter. LED tubes offer a better quality of light (brightest), they do not blink, they do not have ultraviolet and ignition is immediate. Easy to install, they require no maintenance while ensuring high durability.

18W | 120º | 1850lm

Description:

    LED tube specially designed for installation in refrigerated shelves or in any facilities that light foods. Her pink light gives more magnificence and fresh food.

    In addition to reducing consumption, specialized studies ensure that the conservation status is more extended. A change in the lighting linear grocers implies an increase in the useful life of products sold.

What are the advantages LED tube?

    The main advantage is the saving of energy. A conventional tube consumes much more and also he needs a reactor whose consumption varies between 3 and 8 watts per tube. Another key benefit is the reduction of maintenance costs because the LED tube uses no ballasts or starters.

    The delay in economic Damping installation LED tubes depends on several factors: number of hours Ignition, days and times price discrimination. We offer a personalized so you can have the time Damping assistance.

Life: The LED tubes have a shelf life greater than 50,000 hours, 10,000 hours face of a conventional fluorescent tube.

Resistance: better LED tubes can withstand the knocks and vibrations. In fact, they can be removed and repaired.

Consumption: The LED tubes consume up to 50% power less than conventional fluorescent tubes. A fluorescent tube with a 18W-600mm and a reactance choke may consume twice the power due to the reactance. Then the tube is a normal consumption of 36W when the tube of a 600mm LED is 8 / 12W.

Operation: The LED tubes are instant-on that does not affect their life. However, a fluorescent tube takes a long time to turn on and thereby affecting its life.

Environment: LED tubes do not need gas to ignite. However, fluorescent tubes are made of mercury vapor which is very hazardous to health and the environment.

Instructions for use of the facility:

1. Disconnect power.

2. Remove the conventional fluorescent tube.

3. Unscrew and remove the starter and then disconnect the cables from the ballast.

4. Connect phase on one end of the tube and the other end on the neutral.

5. Place the new LED and connect the electrical current tube.

Where is it better to install LED tubes?

    LED tubes are perfect for bright places for many of hours: lighting parking lots, Hotel Bookings, and Schools, offices, shopping centers.

Installation image:

led tube rose images: