T8 SI-2 DIY LED TUBE no need remove ballast anr starter & no change the wiring
Negotiable /Unit
Min.Order:4 Units
Shenzhen Cina LED Lighting Tech Limited
T8 Hi 3014 LED TUBE, High Standard, High Lumens, High CRI, High PF
DIY LED tube, no need remove the Ballast and no need change the Wiring
New LED tube, no need remove the Ballast and no need change the Wiring
DIY LED tube, no need remove the Ballast and no cut the Wiring
NEWLED tube no need remove the Ballast and no need change the Wiring
Plug&Play LED tube, no need remove the Ballast and no cut the Wiring
Special Features:
1. High-performance LED and Build-in Z –Diodes
Even if one led failed, the remaining LEDs will still work.
2, Isolated Driver with 5-7 years lifetime
A, High EMC,no interfere
B, Power factor>0.95
C, Power Efficiency>90%
3.Warranty Policy
3 years warranty with original written warranty ; 20,000 switch cycles(on/off switching).
4, Safety
One-end powered , no electric shock risk .
One-end power Other end has no voltage No electric shock risk
5, Simple
It is easy to use and install with the instruction manual .
6, Professional
Full installation instructions and diagrams provided .
7, Principles
Fully compliant with electrical Safety standards : CE , TUV , PSE, FCC
Photobiological Safety standards : EN 62471
Hazardous materials restriction standards: RoHS
8 , Test Show (SI-2 DIY led tubes are tested with PHILIPS , OSRAM, Panasonic , TOSHIBA, Hitachi and other electronic ballast , and almost all magnetic/inductive ballast )
Application:
1. Office building lighting
2. Hotel lighting
3. Supermarket lighting
4. Warehouse lighting
5. Airport lighting
6. Factory lighting
7, School Lighting
8, Hospital Lighting
9, Car parking Lighting
10, Other lighing
Technical Specification:
Part No. | Main Spec. | |
CA-DT83014WF2-10W( 600mm long )
| Working power | 10W±10% |
Input voltage | 85-265VAC | |
Working frequency | 50-60Hz | |
Luminous flux | 1000-1200Lm | |
power factor | >0.95 | |
CRI | >85 | |
Color Temperature (CCT) | Cool white : 5700K±500K Nature white: 4000K±400K Warm white : 3000K±300K | |
PC type | PC/ Aluminum | |
Size | 600mm*30mm | |
Working temperature | -40~+40°C | |
Storage temperature | -40~+80°C | |
Light Frequency | 90Lm/W | |
Viewing angle | 140 degree | |
CA-DT83014WF4-21W ( 1200mm long )
| Working power | 21W±10% |
Input voltage | 85-265VAC | |
Working frequency | 50-60Hz | |
Luminous flux | 2000-2400Lm | |
Power factor | >0.95 | |
CRI | >85 | |
Color Temperature (CCT) | Cool white : 5700K±500K Nature white: 4000K±400K Warm white : 3000K±300K | |
PC type | PC/ Aluminum | |
Size | 1200mm*30mm | |
Working temperature | -40~+40°C | |
Reserve temperature | -40~+80°C | |
Light Frequency | 90Lm/W | |
Viewing angle | 140 degree | |
CA-DT83014WF5-25W ( 1500mm long )
| Working power | 25W±10% |
Input voltage | 85-265VAC | |
Working frequency | 50-60Hz | |
Luminous flux | 2700-3000Lm | |
Power factor | >0.95 | |
CRI | >85 | |
Color Temperature (CCT) | Cool white : 5700K±500K Nature white: 4000K±400K Warm white : 3000K±300K | |
PC type | PC/ Aluminum | |
Size | 1500mm*30mm | |
Working temperature | -40~+40°C | |
Reserve temperature | -40~+80°C | |
Light Frequency | 90Lm/W | |
Viewing angle | 140 degree |
Packing details :
Item No. | Tube Size | Packing Qty | Gross Weight | Carton Size(L*W*H) |
CA-DT83014WF2-10W | 600mm | 50pcs | 25kg | 632*420*220mm |
CA-DT83014WF4-21W | 1200mm | 25pcs | 18kg | 1246*215*220mm |
CA-DT83014WF5-25W | 1500mm | 25pcs | 22kg | 1540*215*220mm |
Caution & Warning
1.Use indoor or some place where no water.
2.Work under the fixed voltage.
3.Pls operate in the right way when you install the LED tube in case to avoid the power harm and body harm.
4. non-dimmable
5, If any doubt about the installation or use of this product, consult a competent electrician or technician .