Technical Information

---

Max output level (0.5% thd @ 1kHz): +26dB (MAIN L/R) +20dB (INSERT)

T.H.D:

Frequency response: 20Hz~20kHz, +1/-2dB (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM)

Hum and Noise (average Rs=150Ohm):
-127dB equivalent input noise
-95dB residual noise (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM)
-88dB (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) Master fader at nominal level and all channel volumes at minimum.

Maximum Voltage Gain:
66dB MIC IN TO MAIN L/R
60dB MIC IN TO AUX
66dB MIC IN TO EFX
76dB MIC IN TO CONTROL ROOM L/R
58.2dB IN TO REC L/R
46dB LINE IN TO MAIN L/R
46dB LINE IN TO AUX
46dB LINE IN TO EFX
56dB LINE IN TO CONTROL ROOM L/R
36dB STEREO IN TO MAIN L/R
6dB AUX RETURN IN TO MAIN L/R
16dB TAPE IN TO MAIN L/R

Crosstalk (@ 1kHz):
-70dB between input channels
-70dB between input/oputput channels

Gain Control (mono input channel)
44dB Variable (-50dB ~ -6dB) (-30dB ~ +14dB)

Gain Control (combined mono/stereo input channel)
40dB Variable (-20dB ~ +20dB)

Input channel Equalization:
HIGH: 12kHz shelving
MID: 2.5kHz peaking
LOW: 80Hz shelving
*Turnover/roll off frequencies: located 3dB below max. boost/cut

LED Meters: 2x 10 segment LED for MAIN L/R

Internal Digital Effect: 100 selectable presets FOOT Switch control (ON/OFF)

Channel indicators:
Peak: an indicator for each channel turns on when the pré-channel fader signal is 5dB below clipping

Phantom Power (balanced input): +48V DC
Power Supply:  AC 230 V, 50Hz
Power consumption: 25W

Weight: 3,4 kg
Dimensions: 249(W) x 75(H) x 295(D) mm