| 2 | | 310.21 | | 2.0 mm Drill Bit quick coupling, 125 mm |
| 2 | | 310.25 | | 2.5 mm Drill Bit quick coupling, 110 mm gold |
| 2 | | 310.26 | | 2.7 mm Drill Bit quick coupling, 100 mm |
| 2 | | 310.288 | | 2.8 mm Drill Bit quick coupling, 165 mm |
| 2 | | 310.35 | | 3.5 mm Drill Bit quick coupling, 110 mm |
| 1 | | 310.89 | | Countersink for 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws for use with Handle (311.43) or T-Handle (311.44) |
| 1 | | 311.26 | | Tap for 2.7mm Cortes Screws 100mm |
| 1 | | 311.32 | | Tap for 3.5mm Cortex Screws Gold, 110mm |
| 1 | | 311.34 | | Tap for 4.0mm Cancellous Bone Screws 110mm |
| 1 | | 311.43 | | Handle with quick coupling |
| 1 | | 311.44 | | T-Handle with quick coupling |
| 1 | | 312.20 | | 2.0 mm Parallel Drill Guide and Drill Sleeve |
| 1 | | 312.30 | | 3.5 mm/2.5 mm Insert Drill Sleeve |
| 2 | | 312.648 | | 2.8 mm Threaded Drill Guide for 3.5 mm Locking Screws |
| 2 | | 313.353 | | 2.0 mm LCP Solid Threaded Drill Guide |
| 1 | | 314.02 | | Small Hexagonal Screwdriver with Holding Sleeve for 2.7 mm, 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws, and removal of 3.5 mm Cannulated Screws |
| 1 | | 314.03 | | Small Hexagonal Screwdriver Shaft for 2.7 mm, 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws and removal of 3.5 m m Cannulated Screws and 3.9 mm Locking Bolts quick coupling |
| 1 | | 314.115 | | StarDrive(TM) Screwdriver T15, self-retaining |
| 1 | | 314.116 | | StarDrive Screwdriver Shaft T15, self-retaining, quick coupling |
| 1 | | 314.467 | | StarDrive Screwdriver Shaft T8, 105 mm |
| 1 | | 314.468 | | Holding Sleeve for StarDrive Screwdriver Shaft T8 (314.467) |
| 1 | | 319.01 | | Depth Gauge for 2.7 mm and 3.5 mm Cortex, and 4.0 mm Cancellous Bone Screws measures up to 60mm |
| 1 | | 319.97 | | Screw Forceps |
| 1 | | 323.023 | | 1.6 mm Wire Sleeve 55 mm |
| 1 | | 323.26 | | 2.7 mm Universal Drill Guide |
| 1 | | 323.36 | | 3.5 mm Universal Drill Guide |
| 1 | | 324.023 | | Threaded Plate Holder |
| 1 | | 324.024 | | Push-Pull Reduction Device |
| 1 | | 329.04 | | Bending Iron for 2.7 mm and 3.5 mm plates 150 mm length, used with Bending Iron (329.05) |
| 1 | | 329.05 | | Bending Iron for 2.7 mm and 3.5 mm plates 150 mm length, used with Bending Iron (329.04) |
| 1 | | 690.591 | | Small Fragment Instrument Set Graphic Case |
| 1 | | VW1203.15 | | 1.25 mm Kirschner Wire 150 mm, trocar point |
| 1 | | VW1605.15 | | 1.6 mm Kirschner Wire with Thread 150 mm |
| 1 | | VW2003.15 | | 2.0 mm Kirschner Wire 150 mm, trocar point |
