Product Details

20A 2POLE Compact Contactor

Model: CM-20/2

Product Description

AC Contactors (Magnetic Contactor) provide remote control of primarily electric motors and compensation & heating systems by cable. They protect the instruments and equipments against overload currents by using thermal relays, for capacitor switching contactor. While switching on a capacitive circuit, a high frequency (1...15Hz) and large transient current peaks are produced. Switching of capacitor for a single or one of the capacitor banks are different from each other. Step by step "switching on" operation is more difficult for contactor than capacitor bank. Because during this operation for capacitor bank, compensated current occurs. For this reason selecting of suitable contactors the compensating current must be take into consideration for 50kVAR and above, and for less than 50kVAR can be omitted.

MINI Contactor mainly applies to circuit of AC 50Hz (60Hz), rated working voltage up to 400V, rated working current up to 63A to control household motor load of which thecontrolling power needs to be relatively decreased.

This products applies to places such as household, hotels, apartments, etc to realize the automation of large-scale produced household elecric appliances, its main performance indices complay with standards of IEC1095 etc.

Feature

Magnetic Contactor should have the high current value without being exposed to and damaged or boiling. This belongs to the quality of contactor. (Contact surface quality and weld technology) Especially at AC-3 and capacitor command, selectivity of contactor is very important.
Current which passes through the contacts causes warming when the contactor is closed. This warming is limited with the standards. For IEC60947-4-1 when continual thermal current (Ith) is passed though the main contacts, maximum increasing temperature should not exceed 65k.
While the contactor is cutting the current, electrical arc occurs between the seperated contacts. Arc is the result of the thermal impression of electron and ion current which broke off the contact material. Temperature of the arc reaches to thousands of degrees and this temperature is too high for metals and insulators which are used at contact making and cutting cells. Therefore, arc should end as soon as possible. For this reason separators are used inside of contactors.

Rated Current.............................................................20A
No. of Pole...................................................................2-POLE
Rated Operational Voltage.........................................690V AC
Rated Insulated Voltage.............................................690V AC
Frequency....................................................................50/60Hz
Standards................................................................... IEC60947-4-1, IEC1095
IP / NEMA Rating.........................................................IP20
Connection..................................................................Screw + Cable Lug
Working Temperature................................................-20℃ ~ +80℃
Mechanical Life.......................................................... 20,000times
Sample Service...........................................................Pay to Provide
Quality Assurance......................................................24 months

Item	No. of Pole	Rated Thermal Current	Case Qty.
Model	No. of Pole	(A)	(Pcs)
CM-20/1	1P	20	120
CM-20/2	2P	20	120
CM-20/3	3P	20	60
CM-20/4	4P	20	60
CM-25/1	1P	25	120
CM-25/2	2P	25	120
CM-25/3	3P	25	60
CM-25/4	4P	25	60
CM-32/1	1P	32	60
CM-32/2	2P	32	60
CM-32/3	3P	32	40
CM-32/4	4P	32	40
CM-40/1	1P	40	60
CM-40/2	2P	40	60
CM-40/3	3P	40	40
CM-40/4	4P	40	40
CM-63/1	1P	63	60
CM-63/2	2P	63	60
CM-63/3	3P	63	40
CM-63/4	4P	63	40

Note: Please mention the coil voltage when ordering. Our standard coil voltages are 24V, 36V, 110V, 220V, 380V, 415V, other else upon request.

Dimension