Model

D-100A

D-100B

CH1

CH2

CH1

CH2

DC output voltage

5V

12V

5V

24V

Output voltage range(Note:2)

±2%

±6%

±2%

±7%

Rated output current

15A

2A

15A

1A

Output current range

1-15A

0.3-2A

1-15A

0.2-1A

Wave and noise(Note:3)

100mVp-p

100mVp-p

100mVp-p

100mVp-p

Inlet stability(Note:4)

±0.5%

±1%

±0.5%

±1%

Load stability(Note:5)

±0.5%

±5%

±0.5%

±6%

DC output power

98W

99W

Efficiency

78%

80%

Adjustable range for DC voltage

CH1; +10, -5%

CH1; +10, -5%

AC input voltage range

88~132VAC/170~264VAC selected by switch 47~63Hz;120~370VDC

Input current

2.8A/115V 1.6A/230V

AC inrush current

Cold-start current 35A

Leakage current

<3.5mA/240VAC

Overload protection

105%~150% Type: pulsing hiccup shutdown Reset: auto recovery

Over-voltage protection

CH1: 5.75~6.75V

Temperature coefficient

±0.03%/°c(0~50°c)ON+5V

Setup, rise , hold up time

200ms,50ms, 20ms at full load

Vibration

10~500Hz, 2G 10min,/1cycle, Period for 60min, Each axes

Withstand voltage

Input and output internal: Input and encolsur: 1.5KvAC, Output and enclosure,  0.5KvAC

Isolation resistance

Input and output internal: Input and enclosure, Output and enclosure:500VDC/100MΩ

Working temperature and humidity

 -10°c~+60°c(Refer to output derating curve), 20%~90%RH

Overall dimension

199×110×50mm

Weight

0.85Kgs

Safety standards

UL 1012, TUV EN60590(IEC950, UL 1950) Apporved

EMC standards

CISPR22(EN55022)class B, IEC801-2,3,4 IEC555-2 Verification

Note:                                                                                                                                                                    

1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer.                 

2. Error: include the setting error, line stability and loadstability.(Note:5).                                                               

3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.               

4. Inler woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage.                         

5. Load stability test: The load is from 0% to 100%.                                                                                                 

6. Total output canba maxinum Current, total load can not exceed the maxium output power.