Product Details

Specifications

1. New product, paten product
2. 1000kN Load capcity
3. Tensile, bending test of rebar
4. ISO7500-1, ASTM-E4

Steel Rebar Tensile Testing Machine 100Ton 1000kN

1. Introduction

This WAW-G Series Computerized Electro-hydraulic Servo UTM is our second generation UTM with high configuration and high testing accuracy. It is widely used for tensile, compression, bending and shearing test for metal materials, like steel, alloy, aluminum, etc. With special accessory, it can also be used for mechanical property test of fastener, steel wire rope and components. The machine is calibrated according to ISO 75001 and ASTM E4. It can do many different kinds of test according to different standards, ISO6892, ISO7438, ASTM A370, ASTM E8 and BS EN standards.

2. Main technical parameters

Parameter Model	WAW-1000G
Max. testing force	1000kN
Accuracy	±0.5%
Relative error of testing force	±0.5%
Resolution of testing force	1/300000
Resolution of displacement measuring	0.005mm
Extension measuring	Gauge length 100mm, 25mm measuring range
Relative error of deformation value	±0.5%
Round specimen diameter range	Φ13mm-Φ60mm
Flat specimen thickness range	0-20mm 20mm-40mm
Flat specimen width range	120mm
Tensile space	650mm
Compression space	580mm
Upper and lower compress plates size	210×210mm
Clearance between columns	500mm
Distance of bending by pass roll	30-600mm
Max. piston stroke	250mm
Control range of stress speed	1MPa~60MPa /s
Speed adjusting range of testing strain	0.00025/s~0.0025/s
Displacement speed controlling range	0.1-60mm/min
Power supply	380V±10%, 50Hz, three phase
Work environment	10-40°C, Relative humidity≤80%
Dimension of host machine (L×W×H)	1050×890×2560mm
Dimension of control cabinet (L×W×H)	820×700×2000mm
Weight	4500kg