135x135x38 mm  High Performance AC Cooling Fan (Dual Ball bearing AC Fan)

General

Cooling fans are designed to solve thermal management challenges, as excessive temperature is the biggest cause of equipment failures, and as chip speed and device density increases, thermal management is becoming a key challenge. Cooling fans can help.

Cooling fan is a device that creates airflow by using a motor to rotate blades. They are essential in the smooth operation of many sophisticated machines, such as electronic equipment for ventilation and cooling. Cooling fans use a propeller to generate air flow in the direction of the axis of rotation. Capable of generating a large air flow, axial flow fans are suited for applications requiring ventilation cooling.Cooling fan has the performance and reliability to support various commercial and industrial air moving requirements. Available in AC and DC axial fans, Fans can be provided for a wide range of voltages, DC fans are available in selected 12, 24 volt versions. All AC products are offered in 115 and 230 volt versions and compatible with either 50Hz or 60Hz power sources. The DC Fan size 80X80X25(mm) is the solution for your server, PC, and storage cooling needs.

Selection of Cooling Fan

It’s important to select Cooling Fan for the right applications, larger frame size and higher fan speed generally increase airflow, but since higher speed also creates more pressure and noise, the optimum selection will depend on a balance between space available and acceptable noise levels. It is worth nothing, however, that it can be difficult to achieve high reliability within the smallest of frame sizes not least because of the lack of space for adequately sized ball bearings. The thickness of the fan determines its pressure capability, All other things being equal selecting a thicker, and so higher pressure rated fan will normally deliver more airflow against a given system pressure and this may be a more practical alternative for increasing the effective cooling than fitting a higher speed or a larger framed fan. Available in AC and DC axial fans, Fans can be provided for a wide range of voltages, DC fans are available in selected 12, 24 Volt versions. All AC products are offered in 115 and 230 volt versions and compatible with either 50Hz or 60Hz power sources. The DC fan size 80X80X25 (mm) is the solution for your server. PC and storage cooling needs.

Each YOMIN model is RoHS compliant and covered by a 12-month warranty. We offers a comprehensive line of more than 23 axial fans ranging in size from 60mm to 200mm. Each fan is a prudent, cost-effective solution that has the performance and reliability to support various commercial and industrial air moving requirements, including telecom, medical, industrial, automotive, HVAC and office equipment.

Mounting DEMO

There are two type of mounting for our fan, check blow:

Basic Knowledge:

Bearing Type

The relationship between the bearing and the fan is a positive relationship. if the bearing runs breaks, so does the fan. There are different bearing types to consider. There are sleeve type bearing, Dual ball bearing type.

Sleeve bearing benefits: Less noise, lower cost, good shock/vibration resistant.

Dual ball bearing benefits: Long life, less orientation sensitive, wider temperature range.

The life hours increase as you move from left to right. sleeve bearing, compared to Dual ball bearing, tend to be quieter at the initial start and relatively less expensive. As for the ball bearing, it can operate better under extreme temperature.

Sleeve bearings have a life around 30,000 hours or the equivalent of 6years under normal, 8-hour conditions. At the initial point, a sleeve bearing fan is much quieter than a ball bearing. As time sleeve bearing will start losing lubrication and will become noisier than its counterpart.

The life on ball bearing fans are come what different. The life of a ball bearing will, typically, last twice as long than that of a sleeve.

At initial use, the sleeve is much quieter. But if there is a rise in temperature, the sleeve bearing will lose lubrication much faster, leading to faster thermal breakdown.

Still, sleeve fans remain relatively quiet up until the lubrication is gone; whereas ball bearing fans get noisier shortly after it starts.

Airflow

Note, however, that the airflow figure in fan data sheet applies to their unrestricted free-blowing operation and who uses a fan under those conditions? They are purely useful for comparative purposes - components, heat-sinks, PCBs and other mechanical features produce a back pressure that reduces the airflow, and slows the fan’s speed. The more obstructed or complex the air path, the higher will be the static pressure, therefore, designers need a performance curve to predict airflow for a given static pressure. As illustrated by Figure 2, this performance is non-linear, and can lead to significantly lower airflow rates than the data sheet figure. Although it is possible to model and simulate system behavior, simple measurements on prototypes are often the most practical approach to establishing the airflow / static pressure relationship for a particular system, and thus the fans true working point requirements.

Crossing Competetiors:

---- Panaflo ----

---- NMB ----

---- Oriental Motor ----

---- Sunon ----

---- COMAIR ROTRON ----

---- Orion Fans ----

---- ebm-papst ----

• Frame Size............................................135 x 135 x 38 (mm)
• Model.....................................................RC135-38B
• Current...................................................0.16A
• Power.....................................................25W
• Speed.....................................................2,350RPM
• Airflow....................................................92CFM
• Bearing...................................................Dual Ball type
• Feature....................................................Aerodynamic blade design 
• Operating Voltage..................................115VAC; 230VAC; 12VDC; 24VDC ( ±10%)
• Frequency...............................................N/A @ DC; 50/60Hz @ AC
• Insulation Resistance............................10Ω @ 500VDC
• Dielectric Withstands.............................700VAC @ 3 sec; 500VDC @ 1min (Between lead or terminal and housing)
• IP / NEMA Rating....................................IP44
• Operation Temperature.........................-10 °C ~ +70 °C (@65%RH)
• Storage Temperature.............................-40 ~ +80 °C
• Frame Material........................................Die Cast Aluminum for AC Fan; PBT (UL94V-0) for DC Fan.
• Blade Material.........................................PBT (UL94V-0) for both AC Fan and DC Fan.
• Life Expectancy......................................Sleeve bearing: 30,000 hours; Dual ball bearing: 80,000 hours
• Fan Lead Cable.......................................270mm (UL1007AWG#24/26, +:Red; -: Black, Y: Yellow)
• Standards................................................EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3
• Sample Service.......................................Pay to provide
• Quality Assurance..................................12-Month
• Item Condition.........................................Brand-New

Note: Please mention the voltage when ordering. Our standard AC Voltages are 115VAC and 230VAC. Other else upon request.

Standard Export Packaging: