YMH5 series fuse switch disconnector with load operation is applied to reted currrnt 40A-630A,canbe mouted on the bus, and can also be mounted to the mounting plate.Having the upper and lower end of the input and output structure,with blade introduce and arc extinguish device.Switch with occasional closed test holes in cover,built-in signal switching,detection switch,optional fuse monitors,and also do the knife switch us. 

 integrating of current transformer and fuse switch initiated domestically.

with knife-dege entry and arc extinguishing equipment, it is safe for operation.

the isolating knife blade,full-range protection and semiconductor protection fusible core are optional.

fuse wire monitor and signal switch can be additionally mounted, with self-closing fuse wire monitoring hole.

it can be used as primary switch, instaneous breaking capacity reaches 1000kA

busbar mounting in 100MM or 185MM.

in can be installed on system of 100mm directly (busbar frame is T01479,see the attached drawing for dimension),it also can be applied to system of 185mm through T33236,T33237or T33282

The solution for:

>Installtion.

>Switchboards.

>Distribution systems.

>OEM'S.

 Mounting system:

 >Mounting plate system

 >Busbar system

 Application

 Can match  fuse detector

 Can be used as the knife switch 

IEC approved 250A 3P 185mm 1 operation fuse disconnector