Product Details

single phase din rail electronic analog energy meter

Product Description

Type YEM011TG single phase electronic DIN rail active energy meter is a kind of new style single

phase two wire active energy meter, it adopts micro-electronics technique, and imported large scale

integrate circuit, uses advanced technique of digital and SMT techniques, etc. The meter completely

accords with relevant technical requirements of class 1 single phase active energy meter stipulated in

international standard IEC 62053-21. It can accurately and directly measure 50Hz or 60Hz active

energy consumption from single phase AC electricity net, it can display total energy consumption by

step motor type impulse register. It has following features: good reliability, small volume, light weight,

specious nice appearance, convenient installation, etc.

Functions

1. 35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board setting

(mounting holes center distance 67 mm), users can choose any one by themselves.

2. Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.

3.5+1 digits display (99999.1kWh) by step motor type impulse register.

4. Standard configuration one port of pulse output passive(polarity),May select increase a distant port

of pulse output passive (nonpolarity), (Product Configuration code is TI). And contact with all kind of

AMR system conveniently,Complying with standard IEC 62053-31 and DIN 43864.

5. Two LED instructions power supply state (green) and signal of energy impulse (red).

6. Standard configuration don’t detection direction of the flow of load current. May select automatic

detection the direction of the flow of load current. And instructions (Only red energy pulse signal when

working, that is meaning the direction of the flow of load current reverse).

7. Single direction measure single phase two wire active energy consumption. It is nothing with direction

of the flow of load current. Complying with standard IEC 62053-21.

8.may select type S wiring (Product Configuration code is AG).

9. Standard configuration short terminals cover, may select extension terminals cover, in order to

protect to use safety. (Product Configuration code is TH).

Technical parameters

Model

Accuracy

Reference

Voltage(V)

Current

specifications(A)

Starting

current(A)

Insulation

performance

YEM011TG

Class

127

230

5(30)

10(50)

20(100)

0.02

0.04

0.08

AC voltage 4kv for 1 minute,

1.2/50us waveform impulse voltage 6kv

Dimension

Wiring diagram

Packaging

single phase din rail electronic analog energy meter

Phase line

Neutral line (Inlet from bottom, outlet from top)

Port of pulse output passive

Type T wiring: You needn’t cut the cable when wiring, please let the cable through the meter wiring hole