Stainless steel 5000L commerical beer fermentation tank

Fermenters are also called CCT’s (Cylindrical Conical Tanks), FV’s (Fermentation Vessel), primary fermentor or 
unitanks as they are used both for fermenting and lagering.Fermenting is the process during which the yeast 
transforms the wort into beer. Lagerings takes place after fermenting and is the time given to the beer to
stabilize and age after fermenting.

TBE stainless steel fermenters can be individually temperature controlled through glycol jackets and are mostly equipped with accessories such as overpressure and under pressure valve, CIP cleaning jet, sanitary

sample valve, manhole,etc. The design of TBE fermenters is based on our vast beer knowledge and especially the conical fermenter bottom and the fact that we combine fermentation and maturation in the same vessel is very important.When calculating your fermenting and lagering capacity and configuration sufficient time for fermenting and lagering to produce quality beers must be taken into consideration.

• Design pressure 45 psi (3bar); working pressure 15psi (1bar)
• 4 stainless steel legs with leveling footpads
• Interior shell: 304 stainless steel, thickness 3mm
• Exterior shell: 304 stainless steel, thickness 2mm
• Interior and exterior finish bright polish to 0.6~0.8, hygiene surface
• 60 degree cone bottom, other angles can be specified during the design process
• Combined drain extensions and beer port in cone are standard
• 25% headspace, unless a different volume is requested
• Top manway or side manway door
• Dual zone in sidewall and cone dimple cooling jacket with glycol inlet and outlet
• Polyurethane insulation thickness 80mm for cooling jacket on side and bottom
• Fully welded exterior shell
• Non welding CIP arm and rotating 360 degree reach spray ball
• Solenoid relief valve, pressure relief valve (safe valve) are standard
• Pressure gauge
• Temperature sensor well
• Sanitary sample valve and port
• All clamps and gaskets to attach all accessories
• Tank complete with piping, fittings, sanitary valves and all parts.
• Carbonation port is available for special request (stone not included)
• Ladder hooks is available for special request
• Dry hop ports and/or hop bag hooks in any fermenter of any size for special request

 you can enjoy our free consultation servece any time

 you can let us help you plan and design your brewery project if you don't know how to do it quite well

 you will be free of charge for our debugging the brewery equipment to get it work perfectly

 you can decide that which port the goods will arrive at

 you will be trained how to maintain and operate the brew system personally if you are not good at it

 you will learn some new beer production techniques from our professional brewer

 you will have our words: 

 Provide 36 months complete warrantee for main parts and life-time maintenance service;

The seller is responsible for the nature damage of the machinery in the warranty period

except for man-made damage.

All spare parts and wearing parts are attached with the machinery for free;