Name: 5watt gsm900mhz cell phone signal repeater long range coverage 1km wireless rf amplifier
Brand: Kingtone
Availability: InStock

Product Details

5watt gsm900mhz cell phone signal repeater long range coverage 1km wireless rf amplifier

According to your requirement for working frequency, you can choose either type of Kingtone Repeater:

1, Band Selective RF Repeaters System: to amplify all signals in the whole band (Various bandwidth is available upon request).

2, Wireless Channel RF Repeaters System: to amplify only the signals transmitted by the customized 1 or 2 or 4 or 6 or 8 channel (A narrow band with customized central frequency)

Main Features:

1, Output Power +30dBm ~+43dBm for large coverage application;

2, High working gain as Min. 95dB;

3, Adopting filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink;

4, RS232 ports provide links to laptop for local setting and monitoring by built in web interface;

5, Built in wireless modem (Option) for remote monitoring by SMS or GPRS;

6, Details repeater parameters and status can be monitoring by Control Panel, such as temperature, output power level, gain, ATT, return loss, VSWR etc;

7, Support upgrading firmware remotely by GPRS;

8, High gain linear power amplifier technique with reliable performance;

9, Weatherproof design for all-weather installation ;

Product Description

5watt gsm signal repeater GSM900MHz cell phone signal receiver 37dBm rf power amplifier is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.

Technical Specification:

Items	Testing Condition	Specification		Meno
Items	Testing Condition	Uplink	Downlink	Meno
Working Frequency(MHz)	Nominal Frequency	890 – 915MHz	935 - 960MHz	Full band or sub band
Bandwidth	Nominal Band	0.2-25MHz		Can be configured in work band
Gain(dB)	Nominal Output Power-5dB	95±3
Output Power (dBm)	GSM modulating signal	33	43
ALC (dBm)	Input Signal add 20dB	Po≤±1
Noise Figure (dB)	Working in-band(Max. Gain)	≤5
Ripple in-band (dB)	Nominal Output Power -5dB	≤3
Frequency Tolerance (ppm)	Nominal Output Power	≤0.05
Time Delay (us)	Working in-band	≤5
Peak Phase Error(°)	Working in-band	≤20
RMS Phase Error (°)	Working in-band	≤5
Gain Adjustment Step (dB)	Nominal Output Power -5dB	1dB
Gain Adjustment Range(dB)	Nominal Output Power -5dB	≥30

Repeater Installation Steps:

Application:

To expand signal coverage of fill signal blind area where signal is weak
or unavailable.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots etc. It is mainly applicable to such case:
The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than -70dBm;
And can meet the requirement of antenna isolation to avoid self oscillation.

Company Information

Since 2006, Kingtone has been developing and manufacturing Repeaters included CDMA Repeater, GSM Repeater,DCS Repeater, PCS Repeater, UMTS(W-CDMA) Repeater, Tetra Repeater, iDEN Repeater, Wimax Repeater and 4G LTE Repeater etc. Moreover, Kingtone Repeater have different types included Full Band-selective Repeater, Channel-selective Repeater, Frequency-shifting Repeater, Fiber-optical Repeater, Trunk-amplifier etc. The repeaters can be Single-band Repeater, Dual-band Repeater and Tri-band Repeater etc. The Multiple Bands for different Mobile Operators.

5watt gsm900mhz cell phone signal repeater long range coverage 1km wireless rf amplifier

At Present, Kingtone exhibited the highest quality products and enterprise’s comprehensive strength. And Kingtone continues to strengthen technological innovation on repeater products and will launch the new products on the market soon.

for More, please visit:

Certifications

Buying Guides

Wa are repeater manufacturer in China for more than 10 years experience. We can do as below for your best reference:

1, According to different operators's system / frequency,, the repeater can be customized:

2g 3g 4g GSM900 Repeater,

2g 3g 4g CDMA800 Repeater

2g 4g DCS/LTE1800 Repeater,

2g PCS1900 Repeater

UMTS/WCDMA2100 Repeater ,

4G LTE700 2300 2600 repeater

iDEN Repeater / Tetra Repeater / ICS Repeater / UHF Repeater / FM Radio Repeater

2. According to different project, applications, the repeater can be:

Wireless Band Selective Repeater,

Channel Selective Repeater, Digital channel selective repeater

Frequency Shifting Repeater

Fiber Optical Repeater, Digital Fiber Optical Repeater

Trunk Amplifier

Indoor Signal Booster (DAS BDA)

3,According to different clients's request, the repeater can be:

Single Band Repeater,

Dual Band Repeater,

Tri-band Repeater;

Quad band Repeater

4, According to different coverage areas, the repeater can be:

Low power repeater: 15dBm, 17dBm, 20dBm, 23dBm etc.

Medium Power repeater: 2W(33dBm) . 5W (37dBm),

High Power repeater: 10W (40dBm), 20W(43dBm) 30W (46dBm)

Due to the requirement from different countries and different telecom operators, we advise you discuss with us first before placing orders, We would like to provide our best solutions for you!

OEM &ODM are accepted! Welcome to further discuss~