rEPEATER gsm900 MHZ range extender strong signal mobile phone phone signal generator
USD $1 - $999 /Set
Min.Order:1 Set
Quanzhou Kingtone Optics & Electronics Technology Co., Ltd.
2W 33dbm GSM 900 fiber optic repeater ,gsm900mhz optic repeater,900 fiber repeater
Kingtone 5W 37dbm outdoor optic fiber repeater 900 gsm 890-960mhz
kingtone 10W 40dbm outdoor gsm 900 wireless fiber optic cellular repeater
GSM 900 20W BTS fiber optical repeater broadband RF fiber repeater
GSM 900MHz Wireless Cable-Access Fiber Optic Repeater Wireless-Access Fiber Optic Repeater
rEPEATER gsm900 MHZ range extender strong signal mobile phone phone signal generator
Kingtone Repeater Advantage:
1. High linearity PA; High system gain;
2. Intelligent ALC technology;
3.Full duplex and high isolation from uplink to downlink;
4. Automatic Operation convenient operation;
5. Integrated technique with reliable performance;
6. Bandwidth can be configured from 0.2-25MHz in work band.
7.Local and remote monitoring (optional) with automatic fault alarm &remote control;
8. Weatherproof design for all weather installation;
GSM900MHz repeater technical specification:
Items | Testing Condition | Specification | ||
Uplink | Downlink | |||
Working Frequency(MHz) | Nominal Frequency | 890-915MHz | 935-960MHz | |
Frequency Range(MHz) | Nominal Frequency | 1.5G or 1.8G | ||
Gain(dB) | Nominal Output Power-5dB | 50±3(Station Couple) | ||
>80(Air Receive) | ||||
Output Power (dBm) | GSM modulating signal | 0(Station Couple) | 37 | |
33(Air Receive) | 37 | |||
ALC (dBm) | Input Signal add 20dB | Po≤±1 | ||
Noise Figure (dB) | Working in-band(Max. Gain) | ≤5 | ||
Ripple in-band (dB) | Nominal Output Power -5dB | ≤3 | ||
Frequency Tolerance (ppm) | Nominal Output Power | ≤0.05 | ||
Time Delay (us) | Working in-band | ≤5 | ||
Peak Phase Error(°) | Working in-band | ≤20 | ||
RMS Phase Error (°) | Working in-band | ≤5 | ||
Gain Adjustment Step (dB) | Nominal Output Power -5dB | 1dB | ||
Gain Adjustment Range(dB) | Nominal Output Power -5dB | ≥30 | ||
Gain Adjustable Linear(dB) | 10dB | Nominal Output Power -5dB | ±1.0 | |
20dB | Nominal Output Power -5dB | ±1.0 | ||
30dB | Nominal Output Power -5dB | ±1.5 | ||
Inter-modulation Attenuation (dBc) | Working in-band | ≤-45 | ||
Spurious Emission(dBm) | 9kHz-1GHz | BW:30KHz | ≤-36 | ≤-36 |
1GHz-12.75GHz | BW:30KHz | ≤-30 | ≤-30 | |
VSWR | BS/MS Port | 1.5 | ||
I/O Port | N-Female | |||
Impedance | 50ohm | |||
Operating Temperature | -25°C ~+55°C | |||
Relative Humidity | Max. 95% | |||
MTBF | Min. 100000 hours | |||
Power Supply | DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%) | |||
Remote Monitoring Function | Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power | |||
Remote Control Module | RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery |
Remote Unit Specification
Items | Testing Condition | Specification | ||
Uplink | Downlink | |||
Working Frequency(MHz) | Nominal Frequency | 890-915MHz | 935-960MHz | |
Frequency Range(MHz) | Nominal Frequency | 1.5G or 1.8G | ||
Gain(dB) | Nominal Output Power-5dB | 95±3 | ||
Output Power (dBm) | GSM modulating signal | 37 | 40 | |
ALC (dBm) | Input Signal add 20dB | Po≤±1 | ||
Noise Figure (dB) | Working in-band(Max. Gain) | ≤5 | ||
Ripple in-band (dB) | Nominal Output Power -5dB | ≤3 | ||
Frequency Tolerance (ppm) | Nominal Output Power | ≤0.05 | ||
Time Delay (us) | Working in-band | ≤5 | ||
Peak Phase Error(°) | Working in-band | ≤20 | ||
RMS Phase Error (°) | Working in-band | ≤5 | ||
Gain Adjustment Step (dB) | Nominal Output Power -5dB | 1dB | ||
Gain Adjustment Range(dB) | Nominal Output Power -5dB | ≥30 | ||
Gain Adjustable Linear(dB) | 10dB | Nominal Output Power -5dB | ±1.0 | |
20dB | Nominal Output Power -5dB | ±1.0 | ||
30dB | Nominal Output Power -5dB | ±1.5 | ||
Inter-modulation Attenuation (dBc) | Working in-band | ≤-45 | ||
Spurious Emission(dBm) | 9kHz-1GHz | BW:30KHz | ≤-36 | ≤-36 |
1GHz-12.75GHz | BW:30KHz | ≤-30 | ≤-30 | |
VSWR | BS/MS Port | 1.5 | ||
I/O Port | N-Female | |||
Impedance | 50ohm | |||
Operating Temperature | -25°C ~+55°C | |||
Relative Humidity | Max. 95% | |||
MTBF | Min. 100000 hours | |||
Power Supply | DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%) | |||
Remote Monitoring Function | Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power | |||
Remote Control Module | RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery |
Repeater gsm900 MHZ range extender strong signal mobile phone phone signal generator
gsm repeater gsm900 MHZ range extender strong signal mobile phone phone signal generator
signal repeater gsm900 MHZ range extender strong signal mobile phone phone signal generator
mobile signal booster gsm900 MHZ range extender strong signal mobile phone phone signal generator
Kingtone Repeater testing:
Repeater gsm900 MHZ range extender strong signal mobile phone phone signal generator is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
China 3g 4g mobile signal repeater,850 1900MHz cell phone signal repeater/booster/amplifier
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots, hospital etc.
It is mainly applicable to such case:
The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than -70dBm;
And can meet the requirement of antenna isolation to avoid self-oscillation.
At present,Kingtone exhibited the highest quality products and enterprise's comprehensive strength,and Kingtone continues to strengthen technological innovation on repeater products and will launch the new products on the market soon.With your supports and new requirements which can make us improve our service,innovative our technology and consummate the products.
Repeater gsm900 MHZ range extender strong signal mobile phone phone signal generator
A.Professional Solutions |
Q1. I live in a rural area. Rather than having a second phone line for work, I'd like to use my cell phone, but it only works outside. |
A. Signals in many rural areas are marginal and cannot penetrate the walls of your home. Kingtone repeater can be easily deployed to provide coverage throughout your house. In a home, the donor unit is generally deployed outside – for example, under the eaves. Because it is more sensitive than your phone and is mounted higher up, it can usually detect signals that your phone can't. The coverage range of 15,000 to 50,000 square feet (2,000 to 4,600 square metres) is adequate for most homes. |
Q2. When I'm at the cottage, I'd like to stay in touch, but if I publish my cottage number, everyone will call. I'd like to just use my cell phone. Can you help? |
A.Signals in many cottage areas are marginal and cannot penetrate the walls of your cottage. Kingtone repeater can be easily deployed to provide coverage throughout your cottage. In a cottage, the donor unit is generally deployed outside – for example, under the eaves or on a utility pole. Because it is more sensitive than your phone and is mounted higher up, it can usually detect signals that your phone can't. The coverage range of 15,000 to 50,000 square feet (2,000 to 4,600 square metres) is adequate for most cottages. You get the privacy of your cottage and the convenience of your cell phone. Just remember to turn it off sometimes! |
Q3. I'm a production manager in a factory, and no cell phones work inside. I spend most of my time in a couple of spots. Can you help? |
A. Factories and warehouses with lots of metal construction often have poor signals. While these buildings may be large, the employees are generally located in only a few areas. Kingtone repeater can be easily deployed to provide coverage in those spots. The donor unit is deployed on the roof and connected to a coverage unit inside. The coverage range of up to 100,000 square feet is adequate for most trouble spots. Multiple units can be easily deployed to cover office areas and other working locations. |
Q4. No cell phones work in the parking garage. While many employees carry cell phones for safety, the phones aren't useful in any of the high-risk areas. |
Kingtone repeater an provide coverage in parking garages above and below ground. That's useful for emergencies, and it removes the irritation of calls being dropped when you park your car. The donor unit is placed where it can detect a signal (this might be outside or in a stairwell). It is connected to the coverage unit, which is placed in the centre of the garage up to 245 feet (75 metres) away. |
Q5. I work in an office building with no outside access. The windows don't open, and I can't get to the roof. How can I install? |
A. Kingtone repeater can be deployed completely within your office. It is the only in-building in-building solution. The donor unit needs to be placed somewhere where it can detect a signal (this might be beside a window or the outside wall). The coverage unit is then placed roughly in the centre of the problem area. Ideally, the two units are separated as much as possible. For esthetic purposes, the entire system can be placed above the ceiling tiles. |
B. why choose Kingtone? |
Our Advantage |
1. Kingtone have passed the certification to the ISO9001 international quality system. |
2. We are a factory specializing in mobile signal repeater for more than 10 years, There are many skilled workers and professional experienced techonologists in our factory.If you have any question pls don't hesitate to contact us! After you cooperate with us,you will believe we are more professional than other suppliers. |
3. Products's capacity about 1500pcs per month.Our products with high quality and dicect price. |
4.We have win high reputation based on best quality products |
5.OEM & ODM are welcome! |
C. Can we have our logo or company name to be printed on your products or the package? |
Sure,your logo can be putted on our products by sticker and if you want your logo and company name to be printed on the cartons for the products,you can send us the artwork by email. |
D. Can I visit your factory? |
Welcome to visit our factory. We are manufacturer in Quanzhou,Fujian province ,China.You can take flight to Jinjiang Airport.Then,we will pick you up. |
1.Send inquiry to us directly as below ." Email to this supplier" . we will reply you in 12hours
2. Online contact :
skype: jessie.lin3707
whatspp: +86 15959357367