1-Polypropylene fiber is a kind of monofilament and high strength compound fiber, which is produced by special craft processing using 100% polypropylene as raw material.
2-It has high tensile strength and melting point, and also good dispersion ability by three-dimensional random distribution.
3-The fiber itself is very fine, short length, and adding quantity is little, so it is easy to mix uniformly.
4-The common length of fibers can be produced between 6-20mm as requested according to different applications, but now the 6-9mm length product is more used widely, due to the shorter length fiber has better dispersion ability, which can achieve better effect.
1-It can be used to prevent and suppress the produce and development of micro crack aperture, and greatly improve the concrete anti-crack and seepage resistance.
2-It can also improve the impact resistance of mortar, concrete and anti-seismic ability.
3-As a new type of material, it can be used in wide range construction applications, such as basement floor, roof, wall, roofing, pool, roads, wall plaster and other projects.
1-Mixing mode and order is the same as the traditional concrete or cement mortar.
2-When mixing in mixing cars, it is recommended to mix 1 to 2 minutes using ordinary speed. For pre mixing, mixing time should be increased 15 to 30 seconds to make the fiber distribution more uniformly.
3-For used in normal concrete construction project, the recommended dosage is 0.5-0.8 ‰. For other particular applications, it is better to do matching test first.
20kg package in woven bag.
Keep dry where good ventilated.
Do not wet, and keep from sunshine when transport.
