Product Details

Specifications

1 UL/CUL,CB,GS,CE, SAA, FCC
2.I/P:AC 110-240V
3.O/P:DC 24V 1A
4.100% full-load burning test
5.2 years warranty

POE power supply adapter 24V 1A

Specification

Output max power:20-150W

All range voltage input

High efficiency,low loss

European commission of energy

Built in EMC/EMI filter

You can chose the output voltage/current arbitrarily

Widely used in the electronic digital,communication,security,lighting,medical,etc.

Electric performance

Input voltage:AC 110-240V

Output voltage:DC 24V

Output current:1A

Input current(max):0.36A

Input frequency:47-63HZ

Depletion(no load):<0.3W min

Efficiency(max):85%

Protection

Over current protection

Over power protection

Over voltage protection

Environmental and reliability

Operating temperature:0-40C

Operating humidity:10-90%RH

Storage temperature:-20-+80C

Storage humidity:5-90%RH

Leakage current:0.25mA max

After service

This product can be repair within one year for any defects or irregularities caused by the factory.

Remarks

Indooruse only

Usein dry environment

Donot open the charger if not professional person

Usagedguide

1.insertthe AC adapter prongs fully into the wall outlet.

2.Regmovehe AC adapter from the wall outlet when it is fully charged or not in use

Packing

1.Inner package:PEbag,white box or as your demand
2.Outer package:Carton or according your requirement

AC Input

AC Input Voltage.............96~264V AC 47~63 Hz

Inrush Current..............<50A(AC 240V at 25°C)

input Current Limiting..............<2.5A(under min AC input and full load)

Efficiency..............>80%

DC Output

DC Voltage Regulation

Parameter	Line Regulation	load Regulation	Cross Regulation
V1:24V	±5.0%	±5.0%	N/A

DC Output Current

Parameter	Min Current	Rate Current	unit
V1:24V	0.1	1	A

Output Ripple & Noise............240mVp-p@25 °C

Output Dynamic Load Response

Dynamic Load	DC Voltage Regulation
50%~100%~50%	±10%

Overshoot at turn-on/ turn-off.............<10%

Protection Function

SCP...........<0.1 ohms

OCPlimits..........3A

Timing

Hold up time...........>5mS(100Vac/47Hz),>10mS(110/220Vacc/50/60Hz)

Start up time..........<3S(100Vac/47Hz),<2S(110/220Vac/50/60Hz)

Environment Requirement

Working temp...........0°C~ 40°C

Storage temp Range..........-10°C~ +85°C

Working humidity..........25%~90% relative humidity (Non- condensing)

Storage humidity Range..........10%~90% relative humidity (Non- condensing)

MTBF............ 50K hours (25°C , Full load and rated voltage input)

Output voltage and current

Conduction and Eradiate

POE power supply adapter 24V 1A