Product Details

2CPM32/200C double impeller centrifugal pump electric motor pump

RANGE OF PERFORMANCE
8Flow rate up to 250 l/min (15 m³/h)
8Head up to 70m

LIMITS OF USE
8Manometric suction lift up to 9m
8Liquid temperature up to +60°C
8Environment temperature up to +40°C

INSTALLATION AND USE
8These pumps are suitable for handling clean water without abrasive particles and liquids that are chemically non-aggressive to the pump components. Reliable, economical and simple to use, they are suitable for domestic use and in particular for distributing water in combination with small pressure sets, for irrigating gardens. The pumps must be installed in a covered area, protected against the inclement weather.

MOTOR
8Two –pole induction motor (n=2850rpm)
8Insulation Class B
8Protection grade IP44

MATERIALS
8Pump body: Cast iron, with threaded opening ISO 228/1.
8Motor support: Cast iron
8Motor housing: Aluminum
8Impeller: Brass
8Shaft with rotor: Carbon steel or stainless steel
8Mechanical seal: Ceramic/ Graphite
8Bearing: NSK, C&U, or local quality.

Technical Parameters

MODEL		POWER		MAX.FLOW	MAX.HEAD	INLET/OUTLET	MAX.SUCT	N.W	PACKING SIZE
1Phase	3 Phase	(Kw)	(Hp)	(L/min)	(m)	(Inch)	(m)	(K.g)	(mm)
2CPM25/130	2CP25/130	0.75	1	90	44	1 1/4"*1"	8	16	265130160
2CPM25/140M	2CP25/140M	1.1	1.5	160	47	1 1/2"*1"	8	21	265130160
2CPM160/160	2CP160/160	1.5	2	125	66	1 1/4"*1"	8	28	265130160
2CPM25/160A	2CP25/160A	2.2	3	200	68	1 1/2"*1"	8	32	265130160
2CPM32/200C	2CP32/200C	3	4	250	70	1 1/2"*1 1/4"	8	43	265130160

8Three-phase 220/380V-50Hz (60hz), single phase 220V/60Hz, 110V/60Hz, 127V/60Hz & 110V/220V/60Hz are available on request.

Pictures