Specifications

Horizontal multistage pump
1. AISI304 or 316L pump body
2. multistage impeller
3. capacity max 6.6 m3/h

HORIZONTAL MULTISTAGE SELF-PRIMING  PUMP

RANGE OF PERFORMANCE
8Flow rate up to 110 l/min (6.6 m³/h)
8Head up to 55m

 

LIMITS OF USE
8Manometric suction lift up to 9m
8Liquid temperature up to +60°C
8Environment temperature up to +40°C

 

INSTALLATION AND USE
8These pumps are suitable for handling clean water
without abrasive particles and liquids that are chemically
non-aggressive to the pump components. Reliable,
economical and simple to use, they are suitable for
domestic use and in particular for distributing water in
combination with small pressure sets, for irrigating gardens.
The pumps must be installed in a covered area, protected
against the inclement weather.

 

MOTOR
8Two –pole induction motor (n=2850rpm)
8Insulation Class B /F
8Protection grade IP44 /54

 

MATERIALS
8Pump body: stainless steel
8Pump support: Cast iron
8Motor housing: Aluminum
8Impeller: PPO/ SS304
8Shaft with rotor: AISI 416 stainless steel
8Mechanical seal: Ceramic/ Graphite
8Bearing:  NSK, C&U, or local quality.

 

 

 

WARRANTY: 1 YEAR (according to our general sales conditions)

 

MODEL	Power		Max.flow	Max.head	Inlet/Outlet	Max.suct	N.W	Packing Dimension
	(Kw)	(HP)	(l/min)	(m)	(Inch)	(m)	(kg)	(mm)
HMC-3SA	0.55	0.75	90	36	1''X 1''	9	10	379x171x200
HMC-4SA	0.75	1	100	45	1''X 1''	9	11	404x171x200
HMC-5SA	0.9	1.2	110	55	1''X 1''	9	12	429x171x200

 PRODUCTION PROCESS SCHEME