2" Gasoline Engine Pump, with chemical use gasoline water pump
USD $50 - $100 /Piece
Min.Order:50 Pieces
Umex (Ningbo) Imp. & Exp. Co., Ltd.
GASOLINE CHEMICAL ENGINE PUMP HCP-20
Product descriptions:
Multi-purpose, centrifugal self-priming 2" pump
Easy starting OHV commercial engine
Thermoplastic pump housing for chemical capability
Full frame protection and protected by oil alert.
NO | NAME | No | NAME |
1 | Pump cover | 2 | O ring φ200x4 |
3 | Mechanical seal | 4 | Plane key(4.78x18) |
5 | Impeller | 6 | Bolt 5/16-24U NFx20 |
7 | Water diffuser | 8 | Check value |
9 | O ring φ18x3.55 | 10 | Plug |
11 | Outlet conduit | 12 | O ring φ43.7x2.65 |
13 | Pump body | 14 | Inlet branch |
15 | Plug | 16 | O ring |
17 | Bolt(M6x60) | 18 | Bolt M8x30 |
19 | Nut M6 | 20 | Adiabatic |
Performance table:
Engine | GX160/ 5.5HP |
Displacement | 173cc |
Bore and stroke | 70 x 45 mm |
Compression Ratio | 8.5:1 |
Oil Alert | Std |
Pump type | Multi-purpose Centrifugal Self-priming |
Volute | Rigid Mounted Fiberglass reinforced polyester |
Impeller | Fiberglass reinforced polyester |
Mechanical Seal | Carbon/Ceramic |
Priming time | 65 sec. @ 16.4 ft. |
Drive system | Direct |
Discharge capacity | 35 m3/h |
Suction port diameter | 2" |
Discharge port diameter | 2" |
Total head lift | 30m |
Suction head lift | 8m |
Maximum pressure | 45 psi |
Dimensions (LxWxH) | 51.5 x 42.5 x 45.0cm |
Dry weight | 23kg |