Product Details

oxyhydrogen cutting machine

The machine consumes water and electricity

,electrolyze water into hydrogen gas and oxygen gas,we can use H2 and O2 as source of flame.this flame we named oxhydrogen flame,which is a high temperature energy source,can be used for cutting.Also can burst with other fuel together for heating.

Features

1. Neutral flame,Carbonizing flame,Oxidizing flame from soup to nuts.ffully meet customer requirements for the use of fire.

2. The cut surface smooth level off,No hang slag nodular..

3. Narrow kerf width, material saving,small heat affected zone,small deformation.

4. Work without tempering,ensure the operation safety.

5. Reduce pollution emissions,better for the environment.

6. Economic benefit is remarkable,when cut the same amount of steel it can

reduce spending for 40% than propane,reduce spending for 60% than acetylene.

Oxy-hydrogen Cutting

2H2+O2 2H2O

it just formed water vapor in the cutting process,no any carbon emissions

Acetylene cutting

2C2H2+5O2 4CO2+2H2O

there is carbon dioxide emissions

Oxygen-propane cutting

C3H8+5O2 3CO2+4H2O

there is carbon dioxide emissions

Our products are strictly tested before delivery,and approved by CE.

DATA

Items Specifications	Kater-7000
Supply Voltage	Three-phase 380V (50-60) HZ±10%
Rated Capacity	22 KVA
Working current	350A
Work Pressure	≤0.2Mpa
Relative Humidity	≤90%
Rated gas production	7000±10% L/H
Water Consumption	3.8L/H
Maximum cutting thickness	300mm
Flame Temperature	800~3200°C adjustable
Power Supply Protection Grade	IP21S
Insulation Protection Grade	F
Appearance Size	*750560H800MM*
Weight	560KG
Working Medium	Filtered water or deionized water
Cooling way	Air cooling
Effective perforation thickness	90mm
Working way	Continuous
Environment temperature	0~40°C