Product Details

selling low price Clear PVC glue Adhesive made in China

Character :

PVC Glue Adhesive is primarily made of Ethylene-Vinyl Acetate Copolymer and water. It works when the water in the glue evaporates and allows the ethylene-vinyl acetate to form a bond.

PVC Glue Adhesive is a component of a widely used glue type, outstanding performance and the beginning of sticky, adhesive power, drying time is short, good toughness, wate-resistant, acid-resistant, antifreeze, fire retardant, non-toxic tasteless, It does not affect the health, very safety and environmental.

Useage:

PVC Glue Adhesive was widely used for in plain paper, wood, PVC, Nylon, polyester, cotton, plywood, cloth and other porous materials bonding. Such as furniture making, plywood, artificial board, paper products processing, high-end home decoration, the production of high-grade furniture, all types of wood processing, export make-up of the stitching, bonding process, such as finger jointing.

Features:

1) Superior viscosity.
2) Good oil resistivity.
3) Easy to shelling-out

Technical parameters:

Appearance	white emulsion
Viscosity	15000-25000 mPa.s
PH Value	6-7
Film-forming Temperature	Above 41°F (5°C)
Shelf Life	12 months

Use-method:

1) The moisture content of substrate < 12%, no oil, no dust. Lay adhesive on single-side, coating weight > 250g/m2.
2) Use glue roller or brush to lay the adhesive on the sheet material well-proportioned.
3) Coating with wood veneer, scrape it to remove the air.
4) The curing temperature must be higher than 41°F(5°C).

Attentions:

1) After use adhesive, put the lid on to prevent the impurities in and solidify on surface.
2) The best storage and use temperature is 41-95 °F(5-35°C)
3) Before using, need to stir equally. The glue tank cover should be tight to avoid pollution. Please do not use this glue mixed with other adhesives.
4) Shelf Life: 12 months at room temperature.

♥ How to make an order:

1.Send an inquiry;

2.Discuss details;

3.We send samples if clients need (samples are free,but clients need to bear the freight);

4.Clients approve our samples;

5.Clients make 30% deposit or open LC after receiving our PI;

6.Pruduce and tracking quality;

7.Final random inspection;

8.Shipment,then you make balance after you receiving the delivery notice.

9. Follow up after-sales service.

Contact us:

Skype:hb-dingsuplastic05