Product Details

Specifications

ANSI 55-2 Porcelain pin type insulator
1.Factory price
2.Timely delivey
3.Available for OEM
4.ANSI,CESI,DIN,BS CLASS

ANSI Standard 55-2 Porcelain Pin Type Insulator

Product Description

About the Porcelain pin type Insulator

As the name suggests, the pin type insulator is mounted on a pin on the cross-arm on the pole. There is a groove on the upper end of the insulator. The conductor passes through this groove and is tied to the insulator with annealed wire of the same material as the conductor. Pin type insulators are used for transmission and distribution of electric power at voltages up to 33 kV. Beyond operating voltage of 33 kV, the pin type insulators become too bulky and hence uneconomical.

Advantages of Porcelain pin type Insulator

High reliability through accumulated technology

Excellent long-term performance

Pecifications
1.Certificated by IEC ANSI GB ISO9001
2.We can design and produce according to the drawings.
3.We supply insulators with reliable quality reasonable price and good service.
4.We attend 2007 Hannover exhibition, India electricity 2008 exhibition,2008 Hannover exhibition,2009 and 2010 Dubai Middle East electricity exhibition

Specifications

Technical drawings

Technical Specifications

ANSI Class			55-2
Insulator Type			Plain	Radio Freed
Neck Designation in accordance with ANSI C29.5			C
Voltage Rating (U.S.Practice) /KV			7.2
Leakage Distance/in (mm)			5(127)
Dry Arcing Distance/in (mm)			3-3/8(86)
Minimum Pin Height/Average/lb (kN)			2,500(11.1)
Average Flashover Voltage	Low-frequency	Dry/kV	50		45
		Wet/kV	25		25
	Critical-impulse	Positive/kV	75		70
		Negative/kV	95		85
Low Frequency Puncture Voltage/Average/kV			70
Radio-Influence Voltage Date	Test Voltage to Ground/kV		5		5
	Maximum RIV at 1,000kHz/μV		2,500		50
Net Weight/lb			1.4

NOTE:

1.Surfaces coated with semi-conductive glaze are considered as effective leakage surfaces and the distance over them is included in the leakage distance.
2.The side-wire groove shall seat a mandrel with a diameter of 1-1/8 inches. The top-wire groove shall seat a mandrel with a diameter of 1-3/4 inches.

Please contact us for more information.

We can design and manufacture specially on your request.

Click here to see more Porcelain pin type insulators~

Tips:
1. Since we (TCI) have many different models and types,providing exact model or detailed technical
specification in your inquiry will largely help us finding your a better solution within less time and
reducing your communication cost
2. We can design parameters.

Welcome to visit our website for more products~

Packaging