Introduction
CS-PT1300 transmitter developed by our R&D center is a special product for auto application. The product adopts the latest sensor and circuit technology for pressure transmitter. It has the advantages of low cost, high quality, mass production. The compact assembly process makes the products perform stably and reliably.
Technical parameters
Parameter | Value | Note |
Pressure Range | 0~5...300bar | 1MPa≈145PSI |
Overload Pressure | 1.5 times rated pressure | |
Accuracy | ±1%FS (10…40°C) ±2%FS ( 0…80°C) ±4%FS (-40…135°C) | |
Power Supply | 4.5V~5.5VDC | |
Voltage Output | 0.5~4.5VDC (ratio voltage) | |
Insulation | ≥10@50V | |
Response Time | <10ms (0…99%) | |
Vibration/Shoot | 10g/5…2000HzX/Y/Z axis/20g 11MS | |
Wring Type | three-wire | |
Electrics Connector | Packard | |
Connector and Shell | 1Cr18Ni9Ti stainless steel or brass. | |
Compliant | Explosion proof certification, CE certification. | |
Medium Compatibility | Electromagnetic radiation: EN50081-1/; Electromagnetic sensitivity: EN50082-2; | |
Pressure Ports | Male G1/4, M12×1.5, M12×1, M14×1.5 or 3/8NPT | |
Shell Protection | IP65 | |
Weight | ≈45g | |