The SITRANS F M MAG 5100 W with its patented liners of hard rubber NBR or ebonite and EPDM is a sensor for all water applications such as ground water, drinking water, waste water, sewage or sludge applications. 
 

In order to have a complete flowmeter, please combine it with one of the following MAG transmitters:

 SITRANS F M MAG 5000: Cost efficient transmitter, accuracy of + 0.4 % of flow rate

SITRANS F M MAG 6000: Bus communication, batch function and accuracy of + 0.2 % of flow rate

SITRANS F M MAG 6000 I: Alu enclosure, Ex approvals, bus communication, batch function and accuracy of + 0.2 % of flow rate

The sensor can be combined with the energy calculator SITRANS FUE950 

Application examples: Water abstraction, Water distribution network, Custody transfer water meters and Waste water

Details 

 

Meassuring range	0 to 10 m/s
Nominal Sizes	From DN 25 to DN 2000 (1" to 78")
Accuracy	0.2 % ±2.5 mm/s
Operating Pressure	Max. 16 bar (Max. 150 psi)
Ambient temperature	From -40 to 70 °C (-40 to 158 °F)
Medium Tempreature	From -10 to 70 °C (14 to 158 °F)
Liners	EPDM NBR hard rubber Ebonite hard rubber
Electrodes	Hastelloy C-276 Built-in grounding electrodes
Material	Carbon steel, with corrosion resistant two-component epoxy coating
Drinking Water Approvals	EPDM: WRAS, NSF/ANSI Standard 61, DVGW 270, ACS and BelgAqua NBR: NSF/ANSI Standard 61, WRAS Ebonite: WRAS
Custody Transfer Approvals	OILM R 49 MI-001
General approval	MCERTS Sira Certificate No. MC080136/00

Benefits

• Short lead time
• Rugged NBR hard rubber liner for all water and wastewater applications
• EPDM liner specifically for drinking water applications requiring special approvals
• Ebonite liner for all drinking water, water and wastewater applications
• Increased low flow accuracy for water leakage detection (NBR or EPDM liner)
• Suitable for direct burial and constant flooding (IP68)
• Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprint