Plastic Formwork, buy construction formworks on China Suppliers Mobile

Product Details

Specifications

construction formworks
1. made of PE
2. can be used for 50-80 times
3. easy to be released from the mould
4. recyclable

Construction formworks

We use robust plastic material to make our shuttering panels, compared to plywood(absorbs water and starts to swell, delaminate, crack and eventually rot, a lot of oil painting will be wasted, need to be thrown away after 5-8 castings),we gain the benefits as follows:

1) Absolutely waterproof, won't rot;
2) Won't stick to concrete, easy to be handled and released, easy for clean and maintence;
3) Smooth and shiny surfaces on both sides;
4) UV resistant, could be lasted for years;
4) Could be repeatly used for 80-100 castings;
5) Could be 100% recycled after worn out, environmental-friendly;
6) You could get a residual value after 80-100 castings, we could offer you new panels upon recycled based on fixed ratio;
As you may know that plastic could be melt, we use plastic rod and welding gun to repair it:
Step 01: Using hot-air gun to heat the damaged area until the surrounding plastic is soft. Patch up by melting the accompanying plastic strip or rod into the damaged area;
Step 02: Level flat with scraper, leave to cool, sand off for a flat finishing;
The amortized cost for per casting will be much less than plywood.
Surely, we could customize according to your required specifications, it's easy for us to adjust the mould.

We offer plastic formwork to contractors worldwide. Similar as plywood, our plastic formwork could be applied for ceiling, column and wall concrete casting, 100 repeat castings could be achieved once we select suitable supporting systems(You could try both sides as we make it glossy and smooth). The amortized cost for per casting is much less than plywood.

Your size 1220mm*2440mm is our standard specification, we could customize according to your required size and thickness.

Compared to plywood, plastic won't absorb water as it's total polymer material, won't delaminate as it's solid extruded sheet(not pressed with glue), won't stick to concrete(no painting oil required). Plastic could be absolutely recyclable, enviromental-friendly, you could change for new formwork upon worn scraps.