Fiber Optic System, buy fiber mechanical splicer on China Suppliers Mobile

Product Details

Specifications

fiber mechanical splicer
3.5-inch color display, while observing the X-axis, Y-axis direction of the optical fiber

fiber mechanical splicer

Digital fusion splicer with automatic focus function 9seconds splice time and 30 seconds heat time

1.The world's smallest dual observation, tune core type welding machine
2.Weighing only 1.25 kg
3.3.5-inch color display, while observing the X-axis, Y-axis direction of the optical fiber
4.Optical magnification large, clearly visible core
5.Multiple core alignment method: core alignment cladding alignment manually aligned
6.Welding time 9 seconds 30 seconds heating time
7.Rich user interface, internal resistance, intelligent menu design
8.Furrow type wind cover, 15m / s under strong wind can carry splice
9. 5000 meters of altitude dial, weld quality assurance plateau
10. Typically, the cycle of operation 300

Applicable fibers	SM MM DS NZDS
Fiber diameter	Cladding diameter:80-150μm
Fiber count	Single
Fiber cleaved length	8-16mm (Coating diameter:250μm)
Actual average splice loss	0.02dB(SM),0.01dB(MM),0.04dB(DS),0.04dB(NZDS)
Typical splicing time	Typical 9 sec (standard SM fiber)
Return loss	>60dB
Splicing mode	Auto Calibrate Normal Special
Fiber aligning method	Meticulous,Core,Clad,Manual
Splicing program	53 (templet), 40(user)
Tube heating program	9 (templet),24(user)
Tube typical heating time	Typical 30 sec
Protection sleeve length	60mm, 40mm
Storage of splice result	4000 results, 20 parameter per result
Fiber image magnification	200X (X or Y view),50X (X and Y view)
Battery capacity	Typical 300 cycles (splice/tube heaty)
Monitor	3.5 inch TFT color LCD monitor
Tension test	2N
Electrode life	2500
Terminal	USB
Power supply	AC 100-240V with AC adapter
Power supply	Inner Li-battery (5200mAh)
Operating condition	0-5000m above sea level, -10-50°
Operating condition	Max wind velocity of 15m/s
Dimension	125mm(L)×105mm(W)×113mm(H)
Weight	1.55Kg including battery

Function	KL-280G	KL-280	KL-300T	KL-500
Display fiber cleaved angle	-	-	*	*
Display fiber offset angle	-	-	*	*
Display core offset	-	-	*	*
Display clad offset	-	-	*	*
Splicing mode (Auto, Calibrate ,Normal ,Special)	*	-	*	*
Fiber aligning method (Core,Clad,Manual)	*	-	*	*
Arc strength automatic adjustment	*	-	*	*
Image turn over	-	*	*	*
Fiber angle limit	-	-	*	*
Display inside temperature	-	-	*	*
Display ambient temperature	-	-	*	*
Display heater temperature	-	-	*	*
Display air pressure	-	-	*	*
Display battery voltage	-	-	*	*
Taper splice	-	-	*	*
Sleep	-	-	*	*
Auto shut down	-	-	*	*
Software upgrade via USB interface	*	-	*	*

Main Machine

Certification