Specifications

Y6, Y7, Y8 types temperature control fo industrial application
77 x 35 mm, On OFF Electronic controllers types

Main features: These products come in 4 different dimensional configurations, in control (One sensor) or control + high limit safety (2 sensors or one sensor + one bulb) electronic or thermostat control
Temperature range:numerous from -35 to +760°C

Main advantages :

 

• The simplest and most economical control systems of the Y6, 7, 8 electromechanical temperature controls range.

 

• Heavy duty housing for outside use, IP65 and IK10. PA66 for Y8 and aluminum for Y6 and Y7

 

• Instinctive understanding of the setting by the end customer.

 

• It has proven reliability, and a good immunity to power supply problems.

 

Standard equipment :

 

• Knob with adjustable stop for positioning a mechanical limit at high or low setting.

 

• Red and green lights, indicating 230V in and out voltage.

 

• Fuse for internal relay circuit protection (When present).

 

• Illuminated on-off switch is standard on types with relays or relay board. It is an option on other models.

 

• Knob printed in ° C

 

• 4 wall mounting removable legs

 

• Connection block with 5 terminals for 6 mm² wires and 5 terminals for 2.5 mm² wires (10 x 10 mm ² for 30A and higher models). Internal wiring provides connection between thermostat capillary and ground terminal.

 

The connection block is equipped with a jumper between terminals 1 and 2, it allows connecting a safety device, a timer, or an external wired remote control.

 

On versions using power relay(s) this jumper is on the power relay coil circuit. This external connection is not available on 3 poles models without relay.

 

Contact action (Types with manual reset thermostat option) :

 

Versions with manual reset thermostat are multiple, because of the many possible configurations. The manual reset thermostat can be SPST, DPST, 3PST or even 4PST, failsafe or standard. Single pole thermostats can be coupled to a SPST or DPST or 3 pole ST power relay, or to a 3 poles relay board. Some configura- tions also allow the coupling with an external thermal fuse (“TCO”). The choice of different configurations depends on the final application, and the require- ments to use single poles or multiple pole switching systems, independent or not.

 

Minimum calibration temperature for manual reset thermostats is 40 ° C. (60°C for fail safe versions).  In standard, these manual reset thermostats are cali- brated at 20°C more than the maximum control thermostat setting. Other values on request. With rare exceptions, their contact action is open on tempera- ture rise, without change over.

 

Cables output :

 

• Cable gland output board is equipped in standard with one or two M25cable glands (Other cable gland boards: 2 x M20+1xM24, 1 x 1 “or 4 x M20 for flat heat tracing cables, see page 72).

 

• The two back side M20 X 1.5 outputs are equipped with cable glands with silicone gasket to seal the temperature sensors outlet.

 

• When the Y8 type is used with backside accessories, the version to use is the distant measurement one, and capillary protection tube must be removed.

 

Standard Accessories :

 

10 PA66 red plastic seals, English-French installation manual.

 

Options:

 

• Infrared remote control

 

• 2 poles shaft switch with 3 mm contact distance (Not available on 3 phase models or models with K thermostat)

 

• Enclosure heater

 

• Soft grip backlit knob

 

• ° F knob

 

• Illuminated on-off switch (This option reduces the electrical rating to 12A in no relay versions, and is not available on models with 3 poles without relay and models with shaft switch)

 

• 115-120V power supply.

 

 

 

JPCI Controls (Foshan Gaoming) Co., Ltd

Member of Ultimheat alliance

Ultimheat is a registered trademark, all rights reserved

Contact : Michelle Mai

T: +86 757 88638729

F: +86 757 88681850

Website:

 

 

  

Company profile:

Established in China since 2000, with French technology and investment, our company is proud to have more than 60 years experience in manufacturing electromechanical components and 30 years experience in manufacturing safety component for Spas, swimming pools and hot tubs. This experience, combined with high tech equipment and high tech raw materials let us develop the new components needed by rapid expansion of Asian and Chinese market.
In our new factory, on more than 8000 square meters production lines, we have two manufacturing divisions:
Division one is producing components:
Thermostats, energy regulators pressure switches, level switches, flow switches, fire detection fusible links, heating elements and ceramic connection blocks.
Division two is producing complete assemblies and sub assemblies on customer specifications:

Swimming pools heaters, heat pumps backup heaters, spas heaters, small water heaters, immersion heaters, aluminum foils heaters, baseboard and convection heaters sub assemblies
Our R&D team develops new products upon customer specification, taking care of international safety standard (UL, CE, etc.).
We produce our own stamping, bending, plastic injection, zinc alloy injection, and machining.
We are equipped with up to date automatic and CNC TIG welding and laser welding equipment and ultrasonic welding checking.
We have our own climatic room, corrosion testing loops, salt spray testing, and more than 30 specific equipments for products life testing.
Our income quality control laboratory is equipped to check raw material (plastics, metals) physical characteristics and dimensions.
Our finished product control laboratory has more than 200 machines to calibrate and check temperature, pressure, level and flow controls.
From the raw material to the finished product we control every production step. Meet your control equipment demand rapidly and safely is our consistent promises.

 

Basic Information

	Product/Service Sell):	Flow switches, level switch,pressure switch, thermostat,heating elements, back up heaters for heat pumps
	Number of Employees:	200 to 300 People

Trade & Market

	Main Markets:	North America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe Central America Northern Europe Southern Europe South Asia Domestic Market
	Total Annual Sales Volume:	US$2.5 Million - US$5 Million
	Export Percentage:	60%

Factory Information

	Factory Size (ters):	10,000 square meters
	Factory Location:	Datian Cunkou, Fuwan industrial zone,Gaoming of Foshan, Guangdong province,China.
	Number of Production Lines:	15
	Number of R&D Staff:	5-10
	Number of QC Staff:	more than 15 People
	Management Certification:	ISO9001/14001
	Contract Manufacturing:	Customized products on request (MOQ apply), OEM developments welcome.