Specifications

Paddle water pump flow switch
1, micro-switch contact,
2,1/2 BSPP male thread
3,Type: R1D

Main features: Water flow detection on water pipes

Functional principle: Balanced paddle, perpendicular to the main flow, actuating a micro- switch. Flexible elastomeric gasket between paddle and electric switch

 

Main housing material: PPO, fiber glass reinforced, usable with potable water.

 Paddle material: Polypropylene, resistant to ozone and water disinfection products

 Paddle gasket: Santoprene, resistant to ozone and water disinfection products

 Electrical rating: 5A resistive, 230V AC

 lectric contact type: SPDT, open or close by flow rise

 Liquids compatibility: For use with clean water and liquids without chemical incompatibility with PPO and Santoprene

 Nominal pressure at 20°C: 1MPa (PN10)

 

 

 

 

Nominal diameter: Can be used on 32 to 63 mm internal diameter pipes

 

The paddle is cleavable and can be cut at various lengths upon pipe diameter. There are cutting lines numbered 1 to 9 every 5mm.

 

Recommended mounting position: Vertical, with paddle downside. Other positions are possible with a change in the calibration value related to the paddle weight. .

 

Water pipe connection: Male thread 1/2”(BSPP) and NBR gasket. Must be used on a BSPP ½”female fitting perpendicular to the main pipe.

 

Recommended torque: 7Nm

 

Liquids temperature range: 5 to 80°C

 

Ambient temperature range: 5 to 50°C

 

Ingress protection: IP65

 

Electrical connection: 3 x 0.75 mm² cable, PVC insulation, style H05VVF.

 

Installation instructions:

 

- Check carefully the paddle orientation: The arrow on housing must be exactly parallel to the pipe

 

- A 5 mm minimum gap must be respected between end of the paddle and tube wall opposite to the 3/4” fitting.

 

- We recommend the use of nozzles of length less than or equal to 18mm between the gasket seat and the inside of the tube and with an inner diameter greater than or equal to 20mm, to avoid blocking of the paddle.

 

Accessories: 1/2” female PVC saddles forDN40 to DN100 (OD) PVC pipes, and other fittings: see last section of this catalogue

 

Options: cable with connector or terminals, other cable length, paddle type B (see type R1B)

 

Reference

 

 

 

dMain references

 

	Cable length
	500mm	1m	2m
Reference	R1DH05079F43N050	R1DH05079F43N100	R1DH05079F43N200

 

 

JPCI Controls (Foshan Gaoming) Co., Ltd

Member of Ultimheat alliance

Ultimheat is a registered trademark, all rights reserved

Contact : Michelle Mai

T: +86 757 88638729

F: +86 757 88681850

Website:

  

Company profile:

Established in China since 2000, with French technology and investment, our company is proud to have more than 60 years experience in manufacturing electromechanical components and 30 years experience in manufacturing safety component for Spas, swimming pools and hot tubs. This experience, combined with high tech equipment and high tech raw materials let us develop the new components needed by rapid expansion of Asian and Chinese market.
In our new factory, on more than 8000 square meters production lines, we have two manufacturing divisions:
Division one is producing components:
Thermostats, energy regulators pressure switches, level switches, flow switches, fire detection fusible links, heating elements and ceramic connection blocks.
Division two is producing complete assemblies and sub assemblies on customer specifications:

Swimming pools heaters, heat pumps backup heaters, spas heaters, small water heaters, immersion heaters, aluminum foils heaters, baseboard and convection heaters sub assemblies
Our R&D team develops new products upon customer specification, taking care of international safety standard (UL, CE, etc.).
We produce our own stamping, bending, plastic injection, zinc alloy injection, and machining.
We are equipped with up to date automatic and CNC TIG welding and laser welding equipment and ultrasonic welding checking.
We have our own climatic room, corrosion testing loops, salt spray testing, and more than 30 specific equipments for products life testing.
Our income quality control laboratory is equipped to check raw material (plastics, metals) physical characteristics and dimensions.
Our finished product control laboratory has more than 200 machines to calibrate and check temperature, pressure, level and flow controls.
From the raw material to the finished product we control every production step. Meet your control equipment demand rapidly and safely is our consistent promises.

 

Basic Information

	Product/Service Sell):	Flow switches, level switch,pressure switch, thermostat,heating elements, back up heaters for heat pumps
	Number of Employees:	200 to 300 People

Trade & Market

	Main Markets:	North America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe Central America Northern Europe Southern Europe South Asia Domestic Market
	Total Annual Sales Volume:	US$2.5 Million - US$5 Million
	Export Percentage:	60%

Factory Information

	Factory Size (ters):	10,000 square meters
	Factory Location:	Datian Cunkou, Fuwan industrial zone,Gaoming of Foshan, Guangdong province,China.
	Number of Production Lines:	15
	Number of R&D Staff:	5-10
	Number of QC Staff:	more than 15 People
	Management Certification:	ISO9001/14001
	Contract Manufacturing:	Customized products on request (MOQ apply), OEM developments welcome.