Product Details

application:CMCC,Hotel,school,Enterprise,Soho

300Mbps,500mw outdoor and Indoor wifi access point with ceiling mount design and 2dBi Antenna,12V/24V Passive PoE

External POE:

Internal POE Support 24V POE switch.

NMS Key Function

NMS:Network Management service. One main wireless ap router control othes wireless ap and make the same SSID of wifi coverage. This would be convinient for host to build wireless network for hotel,office,entertainment places.

Ceiling Design, decent and pleasing.

T300, Using ceiling design, the same as the ceiling installed in the lobby, room ceiling or wall, to save interior space while providing the best coverage results. Its cable interface cleverly hidden behind the buckle, making the layout is simple, but does not affect the appearance.

300Mbps wireless transmission rate

T300 is Based on 802.11n wireless LAN standard, using MIMO, OFDM technology, working in the 2.4GHz frequency band, providing up to 300Mbps wireless data transmission rate, capable of higher wireless client access , and backward compatible with IEEE802. 11b / g devices.

Standard 802.3af POE, Use friendly and conveniently

T300 Supports standard 802.3af PoE by electricity, a network cable, you can transfer data at the same time transmit power. Power line without changing the layout of the original case of wireless network coverage, reduce construction steps and cost savings.

Multiple working mode, applicable for multiple requirements

T300 working in AP mode, not only supports Gateway, wireless access point mode (AP), and also supports bridging mode (WDS), Wireless Bridge bridging mode allows two or more devices as a bridge between, easy to extend wireless network coverage to meet the long-range wireless coverage needs.

Specification
Hardware				software
MCU	RT3052			Operation Mode	Access Point / Ap Client /Gateway / WISP
RF	2T2R			Protocol/Standard	IEEE 802.3(Ethernet)
Memory	16MB DDR RAM (May extend to 32MB)				IEEE 802.3u(Fast Ethernet)
Flash	4MB(May extend to 8MB)				IEEE 802.11b/g/n(2.4G WLAN)
Interface	1 x RJ-45 for 10/100 Mbps(POE)			Wireless	Auto-Channel selection
	1 x Reset button(Reset & Factory Defaults)				Distance Control (802.1x Ack timeout)
	1 x Power DC Jack				Multiple SSID (4 SSID)
Power	12V(POE 12V/24V)/1A;110V/220V				WDS AP / WDS Bridge
RF					BSSID
Frequency	802.11b/g/n:			Security	WEP Encryption-64/128/152 bit
	2.4~2.4835GHz				WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
	U.S.,Europe and Japan product covering 2.400 to 2.4835 GHz,programmable for different country regulations				WPA/WPA2 Enterprise (WPA-EAP using TKIP) Hide SSID MAC/IP Address & URL filtering
Modulation	OFDM = BPSK,QPSK, 16-QAM, 64-QAM				Wireless STA (Client) connected list
	DSSS = DBPSK, DQPSK, CCK			Management
Throughput	300 Mbps			System Settings	Web-based configuration (HTTP/Telnet)
Sensitivity	802.11n(2.4GHz)	802.11g	Auto-Channel selection	Firmware Upgrade	Upgrade firmware via web browser or TFTP
				Administration	Admin Password can be configured
				System monitoring	Status in hand , useful statistic and Event log
	-86dBm MCS0	- 90dBm 6Mbps	- 92dBm 1Mbps	Logs	Supports local logs,logs host,logs file export
	-68dBm MCS7	- 72dBm 54Mbps	- 85dBm 11Mbps	Reset	Reset or factory defaults
	-83dBm MCS8			Backup	Restore settings & configuration of the device to local file
	-64dBm MCS15
Output Power	Radio1(WLAN1)			Physical Property
	802.11n(2.4GHz)(± 1.5dBm)	802.11g(± 1.5dBm)	802.11b(± 1.5dBm)	Temperature	Working: -10°C~55°C ; Storage: -20°C to 70°C
	26dBm MCS0~2/MCS8~10	25dBm 6~24Mbps	26dBm 1~11Mbps	Humidity	5%~95% (typical)
	26dBm MCS3/MCS11	24dBm 36Mbps		Dimension/ Height
	25dBm MCS4/MCS12	23dBm 48Mbps		Package
	24dBm MCS5/MCS13	23dBm 54Mbps		T300 complete set
	23dBm MCS6/MCS14			Poe Box & Power Adapter
	23dBm MCS7/MCS15			User Manual
Antenna	Internal 2dBi Omni ANT			Mounting kit