application:CMCC,Hotel,school,Enterprise,Soho
300Mbps 2T2R In Wall Mount Long Range Wireless Access Point Support OEM
External POE:
12V /24V passive POE
NMS Key Function
NMS:Network Management service. One main in wall mount wireless access point control othes wireless access point devices and make the same SSID for wifi coverage. This would be convinient for host to build wireless network for hotel,office,entertainment places.
Ceiling Design, decent and pleasing.
T300, Using ceiling design, the same as the ceiling installed in the lobby, room ceiling or wall, to save interior space while providing the best coverage results. Its cable interface cleverly hidden behind the buckle, making the layout is simple, but does not affect the appearance.
300Mbps wireless transmission rate
T300 is Based on 802.11n wireless LAN standard, using MIMO, OFDM technology, working in the 2.4GHz frequency band, providing up to 300Mbps wireless data transmission rate, capable of higher wireless client access , and backward compatible with IEEE802. 11b / g devices.
Standard 802.3af POE, Use friendly and conveniently
T300 Supports standard 802.3af PoE by electricity, a network cable, you can transfer data at the same time transmit power. Power line without changing the layout of the original case of wireless network coverage, reduce construction steps and cost savings.
Multiple working mode, applicable for multiple requirements
T300 working in AP mode, not only supports wireless access point mode (AP), and also supports bridging mode (WDS), bridging mode allows two or more devices as a bridge between, easy to extend wireless network coverage to meet the long-range wireless coverage needs.
Specification | |||||
Hardware | software | ||||
MCU | RT3052 | Operation Mode | Access Point / Ap Client /Gateway / WISP | ||
RF | 2T2R |
Protocol/Standard | IEEE 802.3(Ethernet) | ||
Memory | 16MB DDR RAM (May extend to 32MB) | IEEE 802.3u(Fast Ethernet) | |||
Flash | 4MB(May extend to 8MB) | IEEE 802.11b/g/n(2.4G WLAN) | |||
Interface | 1 x RJ-45 for 10/100 Mbps(POE) |
Wireless
| Auto-Channel selection | ||
1 x Reset button(Reset & Factory Defaults) | Distance Control (802.1x Ack timeout) | ||||
1 x Power DC Jack | Multiple SSID (4 SSID) | ||||
Power | 12V(POE 12V/24V)/1A;110V/220V | WDS AP / WDS Bridge | |||
RF | BSSID | ||||
Frequency | 802.11b/g/n: |
Security
| WEP Encryption-64/128/152 bit | ||
2.4~2.4835GHz | WPA/WPA2 Personal (WPA-PSK using TKIP or AES) | ||||
U.S.,Europe and Japan product covering 2.400 to 2.4835 GHz,programmable for different country regulations | WPA/WPA2 Enterprise (WPA-EAP using TKIP) Hide SSID MAC/IP Address & URL filtering | ||||
Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM | Wireless STA (Client) connected list | |||
DSSS = DBPSK, DQPSK, CCK | Management | ||||
Throughput | 300 Mbps | System Settings | Web-based configuration (HTTP/Telnet) | ||
Sensitivity | 802.11n(2.4GHz) | 802.11g | Auto-Channel selection | Firmware Upgrade | Upgrade firmware via web browser or TFTP |
Administration | Admin Password can be configured | ||||
System monitoring | Status in hand , useful statistic and Event log | ||||
-86dBm MCS0 | - 90dBm 6Mbps | - 92dBm 1Mbps | Logs | Supports local logs,logs host,logs file export | |
-68dBm MCS7 | - 72dBm 54Mbps | - 85dBm 11Mbps | Reset | Reset or factory defaults | |
-83dBm MCS8 |
|
| Backup | Restore settings & configuration of the device to local file | |
-64dBm MCS15 |
|
|
|
| |
Output Power | Radio1(WLAN1) | Physical Property | |||
802.11n(2.4GHz)(± 1.5dBm) | 802.11g(± 1.5dBm) | 802.11b(± 1.5dBm) | Temperature | Working: -10°C~55°C ; Storage: -20°C to 70°C | |
26dBm MCS0~2/MCS8~10 | 25dBm 6~24Mbps | 26dBm 1~11Mbps | Humidity | 5%~95% (typical) | |
26dBm MCS3/MCS11 | 24dBm 36Mbps |
| Dimension/ Height |
| |
25dBm MCS4/MCS12 | 23dBm 48Mbps |
| Package | ||
24dBm MCS5/MCS13 | 23dBm 54Mbps |
| T300 complete set | ||
23dBm MCS6/MCS14 |
|
| Poe Box & Power Adapter | ||
23dBm MCS7/MCS15 |
|
| User Manual | ||
Antenna | Internal 2dBi Omni ANT | Mounting kit | |||
FAQ:
1,How to connect device ?
2,How do I log into the web-based Utility (Management Page) of T300 wireless AP Router ?
3,How to set operating Mode: Gateway,WISP,AP,APclient ?
4,PC configuration
5,Troubleshooting
For More Issues, pls press following link to another web page, enter into User Manual of Wireless ceiling AP device.