Specifications
PET bottle blow molding machinefull automatic
6 cavity
6000BPH
Bottle size: 0.1-0.6L
Full automatic hydraulic system PET blow moulding machine
Hydraulic and servo motor system full automatic PET bottle blowing machine
- Colorful touch screen: DELTA(Taiwan);PLC:DELTA(Taiwan). Operate consistently and simply.
- Pneumatic elements: MOHE(Joint)/German FESTO
- Linear construction transports perform to heating and bottle forming
- Upgrade production capacity.
- Upgrade power efficiency.
- Modular design facilitates maintenance
- Air recovery system
- Mould open and close by High quality hydraulic equipment made in Taiwan
- DELTA servo motor control machine moving
Technical parameter:
ITEM | UNIT | BX-S6-H | |
CONTAINER | ntainer volume | L | 0.65 |
Max.neck outer diameter | mm | 38 | |
ntainer diameter | mm | 68 | |
ntainer height | mm | 240 | |
Number of cavity | pcs | 6 | |
Theoretical output | bph | 6000 | |
ELECTRICAL | Max.heating power | kw | 55 |
Installed power | kw | 60 | |
COMPRESSED AIR | Operating pressure | Mpa | 0.7-1.0 |
Low pressure air consuming | L/min | 1000-1500 | |
Blowing pressure | Mpa | <3.5 | |
High pressure air consuming | L/min | 5000-6000 | |
WATER CHILLER | Pressure | Mpa | 0.3-0.5 |
Temperature | degree | 10-12 | |
Flow rate | L/min | 30 | |
MACHINE DIMENSION | Size(L*W*H) | m | 4.0×2.25×2.25 |
Weight | kg | 5500 |