Lamp:

Phillip lamp 132W 2R 

Color Temperature

8000K

Color wheel:

13 color wheel and white

Gobo:

14 gobos

Effect Wheel:

Rotatable prism effect,Frost, Free dimming, Strobe

DMX Channels:

Standard Mode:16CH(default)

Extension Mode:20CH

It can be changed by setting.

Control mode:

Auto-run mode, DMX-512 mode, Sound active mode

Color:

Black

Material:

Plastic

Size:

327x225x415mm

Net Weight:

10.5Kg

Gross Weight:

Package Size:

Ambient Temperature:

-20°C~+40°C

Set up

Run Mode

DMX

Slave status :Receive DMX signal from the control station or host

Auto 1

Host state: run automatically, and send DMX signal to the slave.

Auto 2

Auto 3

Auto 4

Draw Up 8

Forward 0

F-Stand 8

F-Sleep 8

Random

Sound

DMX Address

[001-512]

DMX address setting

Channel Mode

16

Standard methods, CH17-CH20 can not be used

20

Extension methods, CH17-CH20 can be used to control the speed

Invert Pan

ON/OFF

Invert Tilt

ON/OFF

Swap Pan-Tilt

ON/OFF

Exchange XY axis channel

Encoder Pan-Tilt

ON/OFF

Automatically correct position

No DMX Signal

KEEP

Keep the previous state

CLEAR

Reset

Display Power Save

ON

Turn off the backlight after 30 seconds without operation

OFF

Always on

Burn On Startup

ON/OFF

Color Wheel Linear Changing

ON

Color Wheel Linear Changing

OFF

Color Wheel Non-Linear Changing

Load Default(L)

Information

Software Version

M10-Y103

Total Fixture Hours

XXXXX:XX

Partial Fixture Hours

XXXXX:XX

Total Lamp Hours

XXXXX:XX

Partial Lamp Hours

XXXXX:XX

DMX Monitor

Pan

000(0%)

Tlit

000(0%)

Pan Fine

000(0%)

Tilt Fine

000(0%)

Pan-Tilt Time

000(0%)

Dimmer

000(0%)

Stop/Strobe

000(0%)

Frost

000(0%)

Colour Wheel

000(0%)

Colour Function

000(0%)

Static Gobo Change

000(0%)

Gobo Function

000(0%)

Prism Insertion

000(0%)

Prism Rotation

000(0%)

Effects Movement

000(0%)

Focus

000(0%)

Lamp Control

000(0%)

Reset

000(0%)

System Errors

Reset fail, uart error

Driver-board don’t have responses. The Serial Communication Lines between display board and driver board has problems. Or the driver board has problems.

Pan reset fail

Pan switch or motor has problems.

Tilt reset fail

Tilt switch or motor has problems.

Pan Hall error

Pan Hall has problems.

Tilt Hall error

Tilt Hall has problems.

Motor Colour reset fail

Color-wheel Hall or motor has problems.

Motor Gobo reset fail

Gobo-wheel Hall or motor has problems.

Motor Focus reset fail

Focus Hall or motor has problems.

Motor EffMovement reset fail

Prism focus Hall or motor has problems.

Lamp control fail)

Fail to lamp on  or off, lighter or lamp has problems.

lamp hours too long, please replace

When cumulative time exceeds the maximum lamp life time  in "Advanced" menu settings, it will prompt the user to replace it with a new lamp. After changing lamps, clear lamp time in the "Advanced" menu, it will retime the lamp hours.

If the red ERR indicator lights, it means fixture run error. Click here to know moredetails. After you finish, press "OK" button to empty the error log

Manual

1.Color Wheel

[000-255]

All motor reset

2.Stop/Strobe

[000-255]

3.Dimmer

[000-255]

4.Gobo Change

[000-255]

5.Prism Insertion

[000-255]

6.Prism Rotation

[000-255]

7.Macro Function

[000-255]

8.Frost

[000-255]

9.Focus

[000-255]

10.Pan

[000-255]

11.Pan Fine

[000-255]

12.Tilt

[000-255]

13.Tilt Fine

[000-255]

14.Pan-Tilt Time

[000-255]

15.Reset

ON/OFF

16.Lamp Control

[000-255]

17.RFO

[000-255]

18.Color Time

[000-255]

19.DimPriFrost Time

[000-255]

20.Gobo Time

[000-255]

Advanced

Sensor monitor

Pan Hall State

0 means Magnet Closure , 1 means Magnet Stagger

Tilt Hall State

0 means Magnet Closure , 1 means Magnet Stagger

Color Wheel State

0 means Magnet Closure , 1 means Magnet Stagger

Gobo Wheel State

0 means Magnet Closure , 1 means Magnet Stagger

Focus Hall State

0 means Magnet Closure , 1 means Magnet Stagger

Effects Movement Hall State

0 means Magnet Closure , 1 means Magnet Stagger

Pan Code-wheel State

2 digits, each one corresponds to a photoelectric switch in the code-wheel

Tilt Code-wheel State

2 digits, each one corresponds to a photoelectric switch in the code-wheel

Pan Code-wheel Step

When the positive direction, the step value should be increased; while back direction, the step value should be reduced.

Tilt Code-wheel Step

When the positive direction, the step value should be increased; while back direction, the step value should be reduced.

Reset Calibration

Pan Calibration

Pan fine

Adjustments range from -128~+127, +0 means no adjustments

Tilt Calibration

Tilt fine

Color Calibration

Color-wheel fine

Gobo Calibration

Gobo-wheel fine

Focus Calibration

Focus fine

Dimmer Calibration

Strobe-leaf fine

Zero Point Correction

ON

Turn on the Zero Point Correction, it can be adjusted in the fine range from -20~+20.

OFF

Turn off the Zero Point Correction, it won’t be adjusted when the Color-wheel loses its steps.

Lamp life (Hours)

0-9999hours, when operating lamp life hours, system has alarm tips

Lamp Hours Clear

After clearance, lamp hours will restart to calculate.