Specifications

Blow Molded Three-hole Water horse:
1.One-step mouled
2.Chill-proof
3.Anti-sunburn
4.not easy to age

Blow Molded Three-hole water Horse:
1.One-step mouled
2.Chill-proof
3.Anti-sunburn
4.not easy to age

First Class Blow Molded Three-hole Water Horse:

Blow Molded Three-hole Water Horse keeps Vehicles within their Roadway and prevent vehicles from colliding with dangerous obstacles such as boulders, buildings, walls or large Storm Drains.Blow Molded Three-hole water horse is also installed at the road side to prevent errant vehicles from traversing steep (non-recoverable) slopes or entering deep water.

Blow Molded Three-hole Water Horse is installed within Medians of divided highways to prevent errant vehicles from entering the opposing carriageway of traffic and help to reduce Head-on collisions Some of these Blow Molded Three-hole Water Horse, designed to be struck from either side, are called median barriers.Blow Molded Three-hole Water Horse can also be used to protect vulnerable areas like school yards, pedestrian zones or fuel tanks from errant vehicles .

While Blow Molded Three-hole Water Horse is normally designed to minimize injury to vehicle occupants, injuries do occur in collisions with Blow Molded Three-hole Water Horse. They should only be installed where a collision with the barrier is likely to be less severe than a collision with the hazard behind it. Where possible, it is preferable to remove, relocate or modify a hazard, rather than shield it with a barrier .

Specifications:

Model	Length	Height	Top Width	Bottom Width	Water Capacity
RFL-S03	560mm	560mm	150mm	400mm	60kg
RFL-S04	1200mm	600mm	80mm	260mm	60kg
RFL-S05	1500mm	1200mm	150mm	130mm	200kg
RFL-S06	1285mm	650mm	200mm	400mm	200kg
RFL-S07	1650mm	650mm	150mm	450mm	300kg
RFL-S08	1460mm	800mm	250mm	460mm	300kg