Specifications

Solar Road Marker:
1.Light Weight
2.Low profile
3.integral to traffic safety
4.Excellent Adhesion

Solar Road Marker:

1.Light Weight
2.Low profile
3.integral to traffic safety
4.Excellent Adhesion

The Popular Solar Road Marker In the Market:

 The Solar Road Marker is visible and can be heard and felt, due to the rumble effect when a vehicle crosses them.

 Installed on large sections of National Primary/Secondary roads throughout Ireland. Tyre action facilitates self-cleaning keeping the reflective surface clean. A low cost alternative to a conventional embedded Solar Road Marker. Extensively used along the edge of 2-lane rural roads.

Features of Solar Road Marker:

1.Low profile footprint helps to reduce the effects of repeated tyre impacts

2.Tyres wrap around the marker - vehicle's weight on the pavement and less on the stud

3.Tyre action facilitates self-cleaning

4.Reflective lens coated with an abrasion-resistant material

5.Tough polycarbonate lens

6.Lightweight

7.Moulded-in coloured body with matching lens colour for day-time visibility

8.Standards colours available are - Green - White - Amber and all combinations

9.Application finger grips

10.Bonded to the road surface with Polymer Modified bitumen

Benefits of Solar Road Marker:

1.No traffic over run noise

2.High Wet & Dry retro-reflectivity values

3.Body of stud allows day-time visibility

4.High daily outputs thereby minimising traffic disruptions

5.Low profile - 12mm above the road surface

Equipment of Solar Road Marker:

 Vehicle mounted thermostatically controlled vertical pre-heater

 Complies with IS EN 1463 Parts 1 & 2

Technical Specifications:

Solar cell	Mono-crystal solar panel with utmost power of 306mw
Working voltage	1.2V
Working current	10mA average
Flash rate	300±10 times (OR customized)
Max. loading capacity	20tons
LED	3 LED tubes in single side and 6 LED tubes in double sides.
LED color	white, red, yellow, blue and green
Battery (Tow choices)	1.2V 1100maH Ni-MH battery (continuously work 120hours)
	60F golden capacitor (continuously work 140hours)
Material	Aluminium alloy
Dimensions	110 x 90 x 30mm