Technique Data:

Shell: 520*165*135mm

Solar panel: 290*230mm

Base: height 105mm  dia 70mm

Base install pipe: inner dia 60mm

Color: blue red yellow white(the color can be customized)

Working voltage:12V

Battery power: 14Ah

Solar panel: 6w

Warning distance: >2000m (at night)

Working time: 150 hours in rainy days

Product description:

1.Highlight LED, good warning effect, save electricity and energy ,long life span.

2. Light-operated Function: close the MainSwitches, light is out; open the MainSwitches, close the           photoswitches, light is on all the time; open both the MainSwitches and the photoswitches, if the           light is strong, light isn’t bright, on the contrary, light is bright, and it can be controlled  automatically.

3. The shell of the construction flashing light is made of aluminum alloy, and the surface is plastic             spray paint, beautiful and not easy to be corroded, and can be without rust after long time use.

4. The elements of the construction flashing light adopt sealing treatment, high protectiveness,                 Waterproof, dustproof effectively.

5. Every lamp is consist of 20 highlight LEDs, and vacuum coating reflector; Bright transparent, high       shock-resistant, aging resistant PC lampshade,which can make our warning distance be more         than 2000m at night.

6. With a piece of 6W solar panel and 2 pieces of 7AH storage battery, it can work continuously for         150 hours in rainy days. Besides, it can discharge after full charged.

Function:

1.Be placed in the front of pavement maintenance to warn the drivers of careful driving.

2.Be installed in the danger area to warn the drivers and passengers in order to avoid the happening      of traffic accidents. Such as railroad intersections, curves, bridges, the entrance of schools,                residence communities,the factory gates.

Installation instruction:

1. The light is equipped with footstock and baseboard, the drum on the switch side with 3 screws is          baseboard, while the other side is footstock.

2. The footstock is used to fix solar panel. First of all, take down the screw cap, put the solar panel on      the screw, then screw on the screw cap.

3. The baseboard is used to fix the lamp body, insert the support bar into the base, to tighten the             screw.

4. Adjust the direction of the lamp body and solar panels,ensure that the solar panel can receive           light as much as possible.