Product Details

Hot-dipped Galvanized Pressed Steel Water Tank

Product Description

hot-dipped galvanized steel water tank

1.Material:Mild Steel Plate(Q235)

2.Panel size: 1m x 1m, 1m x 0.5m, 0.5m x 0.5m

& 4ft x 4ft

3. Volume: 1-1000m3

Detailed specification

Item name	galvanized water tank
Reinforcing material	galvanized
Basic Material	Special unsaturated polyester resin
Auxiliary Material	Gel coat resin, firming agent Accelerating agent and abrasive material.
Parameters	Tensile strength (Mpa): ≥60 Bending strength (Mpa): ≥100 Barcol hardness (Mpa): ≥60 Flexural modulus (Mpa): ≥5900 Water absorption: ≤1.0% Fiberglass content: ≥25% Maximum distortion of side wall ≤0.5% Distortion of the bottom≤8mm
Measure	1-5000m3
ACCESSORIES	Bolt. nut & washers :Hot-dipped galvanised material.
	Sealing material:Non-toxic P.V.C foam tape shall be used in between the joints
	Ladders and Level Indicator Internal & external ladder shall be made of hot-dipped galvanised material. Lavel indicator shall be made of Aluminium c/w P.V.C ball float.

Company Information

Our company can manufacture all kinds of squre,round FRP(SMC,fiber glass)anti-corrosion, anti-acid base sink, flume, gutter, basin, cistern which suitable to marine culture, sea-farming ,seawater culture.

Three Material of Water Tank

Material	Size	Thickness	Note:
Galvanised Steel(Q235)	1m x 1m, 1m x 0.5m, 0.5m x 0.5m	1.5mm-5mm	As to 4ft x 4ft x 5mm, we have ability to make, but it need to open new mould.
SMC	1m x 1m, 1m x 0.5m, 0.5m x 0.5m	1.5mm-5mm, 8mm, 10mm, l2mm, 14mm, 16mm	SMC tanks are very popular nowadays.
Stainless Steel(SUS304)	1m x 1m, 1m x 0.5m, 0.5m x 0.5m	1.5mm-5mm	Prices are higher than above two items.