Product Description
This series are RTV potting silicone rubber, two components type, with low viscosity and good flowing property, flow quickly and surface is smooth. Deep curing is fast, alcohol molecules are released during curing process, won’t corrode the materials such as copper wires, after curing the performance of resistance to cold and hot cycle and outdoor anti-aging is excellent, good adhesion to most of electronic parts.
Application
Potting to LED lamp modules of display screens, washing wall lamps, project lamps, underground lamps, underwater lamps also potting and protection to common electronic components and circuit boards.
Technical Data
Using Method
Weighing: mix A & B components seperatly, weigh A & B components as per weight ratio 1:1 exactly.
Mixing: put B component to A component, mix evenly, it can be finished by hand or equipment.
Defoaming: natural defoaming if the potting thickness is less than 20mm, vacuum defoaming if the potting thickness is more than 20mm.
Potting: pot the silicone rubber into the products which need to be potted quickly.
Cured: cured at room temperature, after initial curing workers can continue the next working process, complete cured is finished in 24 hours.
Mixing: put B component to A component, mix evenly, it can be finished by hand or equipment.
Defoaming: natural defoaming if the potting thickness is less than 20mm, vacuum defoaming if the potting thickness is more than 20mm.
Potting: pot the silicone rubber into the products which need to be potted quickly.
Cured: cured at room temperature, after initial curing workers can continue the next working process, complete cured is finished in 24 hours.
Safety
If want to change the mixing ratio, please confirm by simple lab test first, increase the dosage of B component can shorten curing time.
Avoid skin and eye contact with using this product, in case of contacting skin, please wipe clean and rinse thoroughly with water. In case of contacting with eyes, rinse with a lot of water immediately and go to your nearest hospital for further care.
Please use the product in a well ventilated area.
Avoid skin and eye contact with using this product, in case of contacting skin, please wipe clean and rinse thoroughly with water. In case of contacting with eyes, rinse with a lot of water immediately and go to your nearest hospital for further care.
Please use the product in a well ventilated area.
Packing
A & B component separately, 22kgs/set ( A component 20kgs/barrel, B component 2kgs/bottle)
Storage
Stored in a cool and dry place
Handlled and transporated fall under general chemical products
Company