Cooling by free air convection 36V 0.35A 12W led light power supply
Negotiable /Unit
Min.Order:1000 Units
Xiamen Evada Electronics Co., Ltd.
Cooling by free air convection 36V 0.35A 12W led light power supply
Features : |
Constant current DC/DC Step-up LED driver |
Output Over-Voltage Protection |
Cooling by free air convection |
Suitable for indoor LED lighting |
Open Frame Type |
3 years warranty |
SPECIFICATION | ||||||||||
OUTPUT | DC VOLTAGE | 36V DC | ||||||||
Output Vol REGION | 20~36V | |||||||||
RATED CURRENT | 0.35A | |||||||||
RATED POWER | 12W | |||||||||
Model No. | CDF-012-035 | |||||||||
LINE REGULATION | ±1% | |||||||||
LOAD REGULATION | ±3% | |||||||||
SETUP, RISE TIME | 3000ms, 100ms at full load 10VAC / 14VAC | |||||||||
HOLD UP TIME (Typ.) | 50ms / 12VAC at full load | |||||||||
INPUT | VOLTAGE RANGE | 10-14VAC | ||||||||
FREQUENCY RANGE | 47-63Hz | |||||||||
POWER FACTOR | PF≥0.50/10VAC PF≥0.50/14VAC | |||||||||
EFFICIENCY (Typ.12Vac/50Hz) | ≥75% | |||||||||
AC CURRENT | 2.0A / 10VAC 1.3A / 14VAC | |||||||||
INRUSH CURRENT(max.) | COLD START 6A/12VAC | |||||||||
PROTECTION | OVER CURRENT (Typ.) | 95 - 108% | ||||||||
Protection type : Constant current limiting, recovers automatically after fault condition is removed | ||||||||||
SHORT CIRCUIT | No short-circuit protection | |||||||||
OVER VOLTAGE | 40~45V | |||||||||
Protection type : Constant voltage limiting | ||||||||||
ENVIRONMENT | WORKING TEMP. | -30 ~ +55℃ @ full load ; +70℃ @ 60% load | ||||||||
WORKING HUMIDITY | 20-95% RH non-condensing | |||||||||
STORAGE TEMP., HUMIDITY | -40~ +80℃, 10 ~95% RH | |||||||||
TEMP. COEFFICIENT | ±0.03%/℃(0-50℃) | |||||||||
VIBRATION | 10 - 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes | |||||||||
OTHERS | MTBF | 30Khours. | ||||||||
DIMENSION | Φ 40*21 mm | |||||||||
NOTE | 1. All parameters NOT specially mentioned are measured at 12VAC input, rated load and 25 of ambient temperature. | |||||||||
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | ||||||||||
3. Constant current operation region is within 75% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. | ||||||||||
4. Safety and EMC design refer to EN60598-1, subject 8750(UL), CNS15233, GB7000.1, FCC part18. |
mini led driver
Mechanical Specification
mini led driver 350mA constant current, mini power supply 12w