Product Details

JS3000 Twin Shaft Compulsory Mixers

“JS “refers to twin shaft compulsory mixers

“3000” refers to discharging volume/batch

Discharging mode of JS3000: Hydraulic discharging

Js series mixer features many advantages which enable it to be used independently or to be used together with PLD series batching machine to assemble a mini concrete batching plant.

The twin shaft mixer is the best to make any kind of concrete: heavy and normal weight concrete (ready mix, prefabrication, industrial and civil building etc) or light weight concrete (polystyrene or expanded clay concrete, expanded concrete). It can homogeneously mix big, round or crushed materials.

Check out detailed info. of our JS3000 twin shaft compulsory mixers as follows please:

Technical parameters:

Model	JS500	JS750	JS1000	JS1500	JS2000	JS3000	JS4000
Discharging volume (L)	500	750	1000	1500	2000	3000	4000
Charging volume (L)	800	1200	1600	2400	3200	4800	6000
Capacity (m³/h)	≥25	≥35	≥60	≥90	≥120	≥150	≥200
Max. Aggregate Size (mm)	≤40/50	≤40/60	≤60/80	≤80/100	≤80/100	≤80/120	≤80/120
Cycle time (s)	60	60	60	60	60	60	60
Discharge height (m)	1.6m, 2.2m, 3.8m	1.6m, 2.2m, 3.8m	1.6m, 2.2m, 3.8m	-	-	-	-
Power (KW)	18.5	30	2x18.5	2x30	2x37	2x55	2x75
Weight (kg)	2400	3570	5500	6500	7600	9800	13000

Photos for reference:

Mixer inside,

Detailed info.

1. Mixing shaft
The mixing shaft is made of steel alloy which has pretty good anti-torsion strength

2. Drive device
The gear boxes of the drive device are planetary type. This kind of design features of compact structure, stable transmission, low noise and long service life.

3. Shaft seals
The two floating oil seal ring and the specially-made seals are lubricated in high pressure grease, which extend the service life of the shaft end seals

4. Mixing Elements

The mixing arms are streamline both in axial and in radial. Material in the mixer tank not only is cut in radial but also is pushed in axial. The large number of blades, their position and their orientation guarantee the right combination between the effects of rolling and circulation of the material during the mixing action.

5.Automatic lubrication

The grease is give by the automatic pump through a sequential distributor.
It dispenses and guarantees low grease consumption and low contamination of the mixing.

6.Hydraulic discharging device
Hydraulic discharging can avoid some disadvantages with pneumatic discharging device like failing to open the discharging door because of low air pressure. When the discharging door is half opened, we can set the opening door device at a random angle. If in emergency, we can open the discharging door by pressing the manual-discharging door knob.

This is Sunny. I will always at your service.

Yuhuangling Industrial Park, Chengyang District, Qingdao

SISOUL GROUP

Mobile: +86-1526 3030 191