Product Details

Product Description

High Quality Bare 9.5mm Aluminum Rod Manufacturers for Electrical Purpose

9.5m Aluminum rod specifications

1. It is mainly used for drawing the core of wires and cables

2. The surface of the rod is clean, smooth and seamless

3. Coil weight: large coil 1000kg, small coil: 300--1000kg

Standard

1. 9.5mm Aluminum rod was produced and provided by consulting and following the American standard ASTMB233 and Germany standard EN17152.

2. Producing and providing the products according to Chinese standard GB/T3954 2001, and consulting and following the American standard ASTM B233:1997, and Germany DIN standard EN 17152:1997.

Main Standard Specifications of High Quality Bare 9.5mm Aluminum Rod Manufacturers for Electrical Purpose

TABLE 1-Textile Shield for Power Cable for 9.5mm Aluminum Rod

Purity	Chemical Composition%
	AL Minimum	Foreign Content,Maximum
	AL Minimum	Si	Fe	Cu	V+Cr+Mn+Ti	Other
Al99.60E	99.6	0.08	0.20	0.005	0.01	0.3

Type	Tensile Strength,N/mm²	Fracture Toughness%,Min	Electrical Resistance Ωmm²/m 20,Max
A	60-80	25	0.02755
A2	80-110	12	0.02785
A4	95-115	10	0.02801
A6	110-130	8	0.02801
A8	120-150	6	0.02801

TABLE 2- Tensile Property Limits for 9.5mm Aluminum Rod

Temper	Tensile Strength
	Ks j	M pa
1350-O	8.5-14.0	59-97
1350-H12 and-H22	12.0-17.0	83-117
1350-H14 and-H24	15.0-20.0	103-138
1350-H16 and-H26	17.0-22.0	117-152

TABLE 3- Electrical Resistivity Limits for 9.5mm Aluminum Rod

Temper	Resistivity	Equivalent Volume Conductivity,%
	Max.Ω.mm2/m	IACS Min.
1350-O	0.027899	61.8
1350-H12 and-H22	0.028035	61.5
1350-H14 and-H24	0.028080	61.4
1350-H16 and-H26	0.028126	61.3