Specifications

Ultrasonic Thickness  Gage SW3

The ultrasonic thickness gauge Model SW6 or SW6U are featured as cost-efficiency and designed to make accurate measurements on steel, cast iron, aluminum, red copper, zinc, quartz glass, polyethylene, PVC, gray cast iron and nodular cast iron. Thickness measurements are made from one side of the material with no need to cut the part.

The SW6 series offer various practical measurement features such as Automatic Probe Recognition that recognizes transducer types, Field Calibration of all materials Sound velocity range 509 up to 18699m/s • 2000 readings memory • Data  

SPECIFICATIONS

Thickness Measurement Range:

0.65 ~400mm(Steel),

0.3~200mm(Glass)

4~80mm(High temperature), 3~50mm(Gray Iron)

Notes: Thickness range depends on material transducer type, surface condition and temperature.

Material Velocity Calibration Range:509~18699m/s

Measuring Accuracy:±0.05mm

Display Accuracy: 0.01mm / 0.1mm

Scanning Rate:2~20 times/sec.

Material Velocity:508~18699 m/s

Scan Velocity: 2times/s~20times/s

Frequency Bandwidths: 1~10MHz

Measuring lower limit of pipes:

(Depend on the probe)

Φ15mm×1.0mm (Probe: 5MHz, Φ10mm)

Φ10mm×1.2mm (Probe: 7.5MHz, Φ6mm)

Display Mode:128×64 matrix LED

Power supply:2  AA  Alkaline Batteries

Operating Time:

280 hours typical battery life,

100 hours continuous with backlight on

Operating Temperature Range:

-10°C~50°C(Ambient Environment)

-10°C~300°C(High Temperature Mode)

Gage Size:136 mm×72 mm×20mm

Gage Weight: 176g(Including Batteries)

SW3 Standard Configuration
• Gage One Set
• Probe One Set(5MHz, Φ10mm)
• Couplant One Bottle(30ml, Glycerin)
• Battery: 2 AA Alkaline Batteries
• Guide Manual
 Hermetic Plastic Kit (18cm X 15cm X10cm)

SW6U With Additional Configuration Of:
 USB Cable

 
• Software Disk