XSD2610 Sand Washing Machine
USD $8,000 - $20,000 /Set
Min.Order:1 Set
Henan Libo Mining Machinery Co., Ltd.
2014 New Products from China Factory Sand Maker (PCL-900A) with High Capacity 55-100t/h
high level cleaning low power consumption model XSD2610 small screw sand washer
high cleaning economical sand washer model XSD2610 sand washing equipment
high effective latest sand washing model XSD2610 rotary sand washer
XSD Series Small Sand Washing Machine
Brief Introduction to Sand Washing Machine
1.XSD Series sand washing machine is a kind of wheeled washing equipment, and can clean and separate the dust and powder from the sand.
2.This sand washing machine series capacity is upto 20-120 t/h.
3.It's energy saving sand washing machine with motor power from 5.5kw to 15kw.
4.Its new seal-structure and reliable driving device can make sure the cleaning effective and a kind of high efficiency sand washing machine matched with the Sand Making Machine.
Operating principle of Sand Washing Machine
The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.
Characteristics of Sand Washing Machine
1)Reasonable structure
2)Large capacity
3)Low consumption
4)Little loss of the sand during the washing process
5)Low failure rate
Main Technical Parameters of Sand Washing Machine
type | XSD2610 | XSD2816 | XSD3016 |
impeller specification(mm) | Φ2600*1000 | Φ2800*1600 | Φ3000*1600 |
impeller speed | 1.178 | 1.177 | 1.179 |
max feed size(mm) | 10 | 10 | 10 |
capacity(t/h) | 20-50 | 50-80 | 50-120 |
motor power(kw) | 5.5 | 7.5-11 | 11-15 |
decelerator model | ZQ50-50I-Z | ZQ65-50-I-Z | ZQ65-50-I-Z |
overall dimension(L*W*H) | 3255*1982*2690 | 3540*3000*2880 | 3845*3000*3080 |
weight(t) | 5.1 | 8.7 | 11 |