Specifications

international standard Cement ball Mill1 Simple Structure
2 Easy operation
3 High grinding ratio
4 Less power consumption

international standard Cement ball mill: 

international standard Cement ball mill grinds material by rotating a cylinder with ceramic grinding balls, causing the balls to fall back into the cylinder and onto the material to be ground. The rotation is usually between 4 to 20 revolutions per minute, depending upon the diameter of the mill. The larger the diameter, the slower the rotation. If the peripheral speed of the mill is too great, it begins to act like a centrifuge and the balls do not fall back, but stay on the perimeter of the mill. The point where the mill becomes a centrifuge is called the "Critical Speed".

 

international standard Cement ball Mill Application:

Cement  mill are generally used to grind material 1/4 inch and finer, down to the particle size of 20 to 75 microns. To achieve a reasonable efficiency, they must be operated in a closed system, with oversize material continuously being recirculated back into the mill to be reduced. It is widely used in building material,ceramic raw material, chemical industry, etc,can be used both dry and wet.

 

international standard Cement ball mill Features:

1) is an efficient tool for grinding many materials into fine powder.
2) widely used in building material, and chemical industry.
3) can be used both dry and wet.

4) As the barrel rotates, the material is crushed between the individual pieces of grinding media that mix and crush the product into fine powder over a period of several hours.
5) The longer the ceramic mill runs, the finer the powder will be.
6) Our ceramic mill have been used to grind glass, powder food products, create custom varnishes, make ceramic glaze, powder various chemicals. 

 

international standard Cement ball mill Working Principle:

The cement mill is a horizontal rotating device transmitted by the outer gear. The materials are transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and ripple liner and different specifications of ceramic ball in the chamber. The centrifugal force caused by rotation of barrel brings the ceramic ball to a certain height and impact and grind the materials. The ground materials are discharged through the discharging board thus the grinding process is finished.

Technical parameters of Cement mill series

 

Specification	Capacityt/h	Speed of tube(r/min)	Driving form	Motor		Reducer		Weight( t )	Remark
				Model	power(kw)	Model	Speed ratio
2.2×6.5	18	21.4	Edge drive	JR148-8	310	ZD70	5	44
2.4×7	2224	20.4	Edge drive	JRQ1510-8	475	ZD70	5	66.93
2.4×8	2628	20.14	Edge drive	JR1512-8	570	ZD80	6.3	88.9
2.6×13	11-15	19.7	Edge drive	YR1000-8/1180	1000	JDX800	6.3	137
2.8×6.5	35	18.65	Edge drive	JR1512-8	630	ZD80	6.3	89.29
2.8×10	45-48	18.65	Core drive	YR800-8/1180	800	MFY80	37.5	159.2
3×6.5	37	18.58	Edge drive	YR800-8/1180	800	JD800	5.6	115
3×9	40-50	18.58	Edge drive	YR1000-8/1180	1000	JD800B	5.6	131.5
3×12	72-75	17.85	Edge drive	YR1400-8/1430	1400	MBY900	5	195.9	wet
3×12	65-75	18	Core drive	YR630-8	1400	JS110-B-F1	42.22	202	wet
3.2×12	72-75	17.86	Edge drive	YR1400-8/1430	1400	JDX900	6.3	166.7	wet
3.4×7.5	60	16.9	Edge drive	YR1000-10	1000	ZDA-100	63	166.7
3.5×10	75	16.8	Core drive	YR1250-8/1430	1250	JS110-A	44.1	153.76
4.6×7.5+3.5	150	15	Core drive	YR2500-6/1430	2500			271.2
4.6×10+3.5	190	15.1	Edge drive		3350			298

Note:The technical parameters are subject to change without notice!