electronic pressure controller for water pump JH-1.2 pressure switch
USD $9.5 - $15 /Piece
Min.Order:1 Piece
Wenling Carven Electric Co., Ltd.
Pressure Control JH-1.2
The Electronic Controller orders the automatic start and stop of the water pump when opening or closing any tap or valve of the system. The controller can keep constant pressure and water flow in the system as long as any tap in the system is open during the pumps operation.
It allows the pump to run at a constant flow. The controller stops rapid cycling of your pump unit, eliminating water fluctuating through your home.
Automatic Pressure Control Switch connects to the discharge of the water pump and operates with an electronic circuit board to sense the pressure and flow in the system. Fit most common water pumps.
♦ Construction characteristics:
Rated Voltage: | 110V - 240V |
Frequency: | 50/60Hz |
Max. Current: | 10A; 20A |
Max. Power: | 1.1KW ; 1.5KW; 2.2KW |
Starting Pressure: | 1.2bar; 1.5bar; 2.2bar |
Max. Pressure: | 10bar |
Joint Screw: | R1" |
Protection Grade: | IP65 |
Max. Operating Temperature: | 60 |
Cable Specifications: | 7.5-9mm |
♦ Optional:
Color: | Yellow; blue; black |
Max. Power: | 1.1KW ; 1.5KW; 2.2KW |
Starting Pressure: | 1.2bar; 1.5bar; 2.2bar |
Cable Specifications: | 7.5-9mm |
Possible Working Defects:
type of defect | causes depending on the unit | causes not depending on the unit |
-The pump does not start | -The electronic card is broken | -Voltage failure -Pump jammed -Electric cables inverted(line/motor) |
-The pump does not stop | -The electronic card is broken -The flow detector is blocked in the upper position -The reset button is blocked -The pump does not provide sufficient pressure | -Presence of leaks which are higher than the minimum flow 0.6L/min |
-Intermittent pump working | -The electronic card is broken -The pump does not provide sufficient pressure | -Presence of leaks which are lower than the minimum flow 0.6L/min |
-The pump is jammed | -The electronic card is broken -The pump provides a pressure which is lower than the restarting pressure | -Water failure -Suction problems |
Wenling Carven Electric Co., Ltd is a professional manufacturer of automatic pressure controls. The factory is located in Wenling, Zhejiang province, with convenient transportation and favorable environment. We are devoting ourselves to development, production and sales for the professional pressure controls. There are rich production experience and development capabilities for our factory. Based on the preferential price and high quality, our products have received the high praise from the general customers. We have “quality-oriented, customer supreme, credibility first” for the purpose, sticking to the principle of mutual and win-win cooperation set each other. We are looking forward to establishing business relationship with customers all over the world. Welcome to inquire and discuss cooperation.