Specifications
electronic pressure switch control is widely used in Self-priming pump/Jet pump/Garden pump/Clarified water pump and so on.
Electronic pressure switch control is widely used in Self-priming pumpTJet pump/Garden pump/Clarified water pump and so on.
It can start and stop the pump automatically. This unit completely replaced tradition pump control system, and more easily to install.
PARAMETER:
| Rate voltage: | 220v-240v,110-120v,110-230v |
| Frequency: | 50/60Hz |
| Max Current: | 10A |
| Max Power: | 1.1kw 1.5kw 2.2kw |
| Initial Pressure : | 1.2bar 1.5bar 2.2bar |
| Max Pressure : | 10bar |
| Interface Thread: | R1 |
| Protection Class: | IP65 |
| Max working temperature: | 60 |
| Cable Specifications: | 7.5-9mm |
PRINCIPLE:
Working principle:
1.Collect changing signal from the pipeline system of water pressure and flow rate, to control the pump work in remote, intelligent and real-time.
2. Open the faucet or valve, automatically start the pump; Close the faucet or valve, the pump automatically stops.
3. When the water pump water shortage or stuck by foreign body, the pump automatically stops by the device, prevent idling and damage the water pump.
WATER PUMP CHOICE :
Choice: The automatic control and the water pump:
S. No. | Automatic controllers starting pressure | water pump lift ( meters) | Distance of valve and automatic controller(meters) |
1 | 0.5bar | >15m | <5m |
2 | 1.2bar | >22m | <12m |
3 | 1.5bar | >25m | <15m |
4 | 2.2bar | >35m | <22m |
WORKSHOP AND FACTORY :
Factroy workshop testing :
PACKAGING AND BOXES:
