Double-source heat pump
Negotiable /Piece
Min.Order:5 Pieces
Foshan Macon Cooling & Heating Energy-Saving Equipment Co., Ltd.
-25C Double source low temperature high cop multi-function heat pump 12Kw
-25C Double source low temperature high cop multi-function heat pump 15Kw Btu
Double source low temperature high cop multi-function heat pump 10Kw
Double source low temperature high cop multi-function heat pump 9Kw
Low Temerature Ground Source&Air Source Multi-fuciton Heat Pump 38kw
2014 new MACON ETL certificate for Canada Double source multi-function heat pump
Macon's Double-source heat pump
Air source combine work with ground source design is big strongpoint for this unit. Highest Efficiency Heat Pump Built for Total house/buildings Comfort
This kind of double-source series are designed for offering heat to bigger houses, or commercial buildings, such as office, workshop, super market, school, etc.
The exclusive double source Multi-function Series heat pump with Greenspeed intelligence is the first of its kind. It is a kind of high efficiency, energy saving and environment friendly equipment, which is mainly used for house heating/warming/cooling &hot water. It can absorb energy from underground&air and transfer it into warm water/air heating/cooling.So the house could be warmed up by pumping the warm water to underfloor heating pipe system or air heat pump pipe system.It can connect to the tank and work with any kind of indoor unit such water type fan coil, radiator, or floor heating pipe, by provide warm or hot water. One unit of monobloc heat pump can also work with several indoor units if necessary.
Its core philosophy is to solve the house heating during the cold climate in Winter and Spring and make room cooling in hot Summer and Autumn by the double sources. This kind of design can do not only heating and cooling but also can provide sanitary hot water all over the year because the second circle heating can use 60oC hot water to heat the 10~15 oC tap water to 55 ~60 oC sanitary water. So it is realized to offer heating,cooling and sanitary hot water with only one heat pump.
According to the test ,it could work safely in -15oC,and reach COP 4.0 in practical working condition .Special modular system design .The whole unit separated in 2 or 3 systems with separate compressors .Each system stays as a module, it can start and work separately .Benefit from this design ,the unit could have different output level according to the heating requirement .And also the modules could start one by one to lower the startup current.
High-efficient energy-saving:
1).Heatpump water heater use heat energy from air(including heat recovery and via compressor work produceing more heat energy release to water to achieve get hot water .
2).Saving more than 75% energy consumption compared to traditonal heaters.
3).During the work process it will not produce watse, no pollution
4).Delivery fresh air to people to make cool to the air , against air conditioner, let people escap greenhouse
5).They delivery clearn energy to people ,Contributuion significant to fight against CO2 emission
6).Low carbon, low exhaust