Product Details

Specifications

mini smps power supply
1.CE Rohs approved
2.Miniature size with complete protections and light weight
3.2 years warranty

Single output constant voltage led driver ac to dc 50w 5v mini smps power supply

50W Single Output Switching Power Supply MS-50series

Low price and high reliability
105℃ output capacitor
AC input power suitable for the world
Hight efficiency and low operation temperature
Soft-start current can reduce the AC input impact effectively
With Short-circuit and overload protection
Compact size,light weight
100% full-load burning test
Installed with EMI filter,minimum wave

SPECIFICATIONS
OUTPUT
Model	S-50-5	S-50-12	S-50-15	S-50-24
DC Voltage	5V	12V	15V	24V
Rated Current	10A	4.2A	3.4A	2.1A
Current Range	0-10A	0-4.2A	0-3.4A	0-2.1A
Rated Power	50W	50.4W	51W	50.4W
Ripple & Noise	75mVp-p	100mVp-p	100mVp-p	100mVp-p
Voltage Adj. Range	+10,-5%	±10%	±10%	±10%
Voltage Tolerance	±2%	±1%	±1%	±1%
Inlet Stability	±0.5%	±0.5%	±0.5%	±0.5%
Load Stability	±1%	±0.5%	±0.5%	±0.5%
Setup, Rise, Hold Up Time	200s,100ms,30ms at full load

INPUT
Voltage Range	100~240VAC 47~63Hz; 240~370VDC
AC Current	1.3A/115V 0.65A/230V
Efficiency	75%	78%	78%	82%
Inrush Current	Cold-start current 18A/115V 36A/230V
Leakage Current	<0.5mA/240VAC

PROTECTION
Over Load	105%~150%
Over Load	Protection type: Fold back current limiting Reset: auto recovery

ENVIRONMENT
Working Temp., Humidity	-10℃~+60℃(Refer to output derating curve),20%~90%RH
Storage Temp., Humidity	-20℃~+85℃,10%~95%RH
Temp. Coefficient	±0.03%/℃(0~50%)
Vibration	10~500Hz,2G 10min,/1cycle,Period for 60min,each axes

SAFETY
Withstand Voltage	I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC

STANDARD
Safety Standard	Meet UL1012 requirement(Not apply for the mark)
EMC Standard	…………

OTHERS
Dimension	1107235mm(LWH)
Weight	0.5Kg

NOTE
1.The testing condition for the parameter above is: 230VAC input, rated load, 25℃70% RH.Humidity. 2.Error.include the setting error,line stability and load stability. 3.Wave test:adopting “A12” double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. 5.Load stability test:the load is from 0% to 100%.

Product Description