Name: LEYU Q-180D SMPS ACto DC 5V 12V 24V -12V Auad Output Power Supply
Brand: LEYU
Availability: InStock

Product Details

LEYU Q-180D SMPS ACto DC 5V 12V 24V -12V Auad Output Power Supply

180W Quad Output Switching Power Supply Q-180 series

Features:
High efficiency, high reliability
AC input range selected by switch
100% full load burn-in test
Protections: Short circuit/ Over load/ Over voltage
Fixed switching frequency at 25KHz
2year warranty

SPECIFICATIONS
OUTPUT
Model		Q-180D
Output number		CH1	CH2	CH3	CH4
DC Voltage		5V	12V	24V	-12V
Rated Current		8A	2A	2A	1A
Current Range		1-10A	0.2-2A	0.5-5A	0.2-1A
Rated Power		172W	172W	172W	172W
Ripple & Noise		80mVp-p	120mVp-p	180mVp-p	120mVp-p
Voltage Adj. Range		CH1:-5%, +10%
Voltage Tolerance		±2%	±6%	±6%	±6%
Setup, Rise, Hold Up Time	200ms, 50ms, 20ms at full load

INPUT
Voltage Range	88~132VAC/176~264VAC selected by switch 47-63Hz; 240~370VDC
AC Current	4A/115V 2A/230V
Efficiency	80%
Inrush Current	Cold start 35A
Leakage Current	<0.5mA/240VAC

PROTECTION
Over Load	105%~150%
	Protection type: Shut down o/p voltage, re-power on to recover
Over Voltage	CH1:115%~135%
	Protection type: Shut down o/p voltage, re-power on to recover

ENVIRONMENT
Working Temp., Humidity	-10℃~+50℃; 20%~90%RH
Storage Temp., Humidity	-20℃~+85℃; 10%~95%RH
Vibration	10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes

SAFETY
Withstand Voltage	I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC

STANDARD
Safety Standard	Design refer to 1950,TUV EN60950
EMC Standard	Design reefer to EN55022(CISPR22),EN61000-3-2,-3,EN55024,EN61000-4-2,3,4,5,6,8,11; ENV50204

OTHERS
Dimension	15014086mm(LWH)
Weight	1.28Kg
Packing	20pcs/25.6Kg/0.95CUFT

NOTE
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Each output can within current range. But total output power can’t exceed rated load. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.