Product Details

Specifications

5v 24v Dual output power supply 35w
A.LED indicator for power on
B.Fixed switching frequency at 23KHz
fessional manufact

35W Dual output power supply 5v 12v SMPS

Company Information

35W Dual Output Switching Power Supply D-35 series

Features:

High efficiency, high reliability, low cost
AC input range selected by switch

Protections: Short circuit/ Over load
Cooling by free air convection
LED indicator for power on
Fixed switching frequency at 23KHz
1 year warranty

SPECIFICATIONS
OUTPUT
Model	D-35A		D-35B
Output number	CH1	CH2	CH1	CH2
DC Voltage	5V	12V	5V	24V
Rated Current	4A	1A	2.2A	1A
Current Range	0.5-4A	0.1-1A	0.5-2.2A	0.1-1A
Rated Power	32W		35W
Ripple & Noise	50mVp-p	100mVp-p	50mVp-p	100mVp-p
Voltage Adj. Range	CH1: -5%, +10%		CH1: -5%, +10%
Voltage Tolerance	±2%	+3%,-7%	±2%	+3%,-5%
Setup,Rise,Hold Up Time	200ms,50ms,30ms at full load

INPUT
Voltage Range	85~132VAC/170~264VAC selected by switch 47~63Hz; 240~370VDC
AC Current	0.8A/115V 0.45A/ 230V
Efficiency	72%		74%
Inrush Current	Cold start 18A/115V 36A/230V
Leakage Current	<1mA/240VAC

PROTECTION
Over Load	105%~150%
	Protection type: Constant current limiting, recovers automatically after fault condition is removed

ENVIRONMENT
Working Temp., Humidity	-10℃~+60℃; 20%~90%RH
Storage Temp., Humidity	-20℃~+85℃; 10%~95%RH
Temp. Coefficient	±0.03%/℃(0~50℃)
Vibration	10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes

SAFETY
Withstand Voltage	I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC

STANDARD
Safety Standard	Design refer to UL1012
EMC Standard	Design refer to FCC Part15 J Conduction Class A

OTHERS
Dimension	*1299838mm(LWH)*
Weight	0.41Kg
Packing	30pcs/13.4Kg/0.86CUFT

NOTE
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation.